Meccano Ltd. Engineering Drawings
LIST OF DRAWINGS BY JOB NUMBER
[1-82][83-146][147-219C][220-6198][6199-23319]Job No. | Title / Description | Comments |
1 | 12½" Perforated Strip | |
2 | 5½" Perforated Strip | |
3 | 3½" Perforated Strip | |
4 | 3" Perforated Strip | |
5 | 2½" Perforated Strip | |
6 | 2" Perforated Strip | |
7 | 12½" Perforated Angle Girder | |
8 | ½" Angle Bracket | |
9 to 9L | Axle Rods | |
10A/B/C | Crank Handles | |
10D/E | Crank Handle Assembly Large & Small | |
11 | Flanged Wheel | |
12 | 1½" Pulley Wheel | |
14 | ½" Loose Pulley | |
15 | Bush Wheel - 8 Hole | |
16 | ¾" Pinion | |
17 | ½" Pinion | |
18 | 1½" Gear Wheel 50 Teeth | |
19 | 1½" Contrate Wheel | |
20 | ¾" Contrate Wheel | |
21 | Worm | |
22 | Circular Strip 7½" diam. | |
23 | Spanner | |
25 | Pennant | |
26 | Blank & Stock Required for Nuts | |
26A | Meccano Bolt 3/8" Long | |
27 | Meccano Bolt - 7/32" Long | |
27A | Spring Clip | |
29 | 7/8" Mitre Wheel | |
32 | 2½" x ½" Double Angle Strip | |
33 | 2½" x 1" Double Angle Strip | |
35 | Faceplate 2½" dia. | |
36 | Rack Strip 3½" Long | |
38 | 1" Triangular Plate | |
39 | Washer | |
40 | 2½" x 1½" Double Angle Strip | |
41 | 3½" x ½" Double Angle Strip | |
42 | 1½" Perforated Strip | |
43 | 5½" x ½" Double Angle Strip | |
44 | Gear Wheel 57 Teeth | |
46 | Single Bent Strip | |
47 | 3" x 1½" Double Angle Strip | |
48 | Bent Strip, Stepped | |
49 | 5½" Perforated Angle Girder | |
50 | 9½" Perforated Angle Girder | |
51 | 9½" Perforated Strip | |
52 | 4½" Perforated Strip | |
54 to 54F | Screwed Rods | |
54B-G-H | Screwed Rods | |
55 | Meccano Bolt - ¾" Long | |
56 | 2½" Reversed Angle Bracket | |
57 | 1" Reversed Angle Bracket | |
61 | Combined Spanner & Scrwedriver | |
62A | Pummel for 1" Fast Pulley | Also used for 1" Sprocket Wheel |
63 | 3½" x 2½" Perforated Flanged Rectangular Plate | |
64 | Short Shoulder Pummel | Used in part nos. 20, 20b, 50, 109, 116 |
64A | Screwed Crank Pummel | Used in part 62a (Threaded Crank) |
65 | Threaded Boss | |
66 | Collar with Grub Screw | |
67 | Set Screw for Pummel | |
68A | Special Long Shoulder Pummel | Used in parts nos. 27, 27a, 27d, 28, 29 |
69 | Grub Screw - 5/32" Whitworth | |
69A | 5/32" Whitworth Grub Screw 7/21" Long | |
69B | Special Set Screw for Meccano Models | |
71 | Crank | |
71A | Crank - Threaded | |
73 | Coupling - Plain | |
73B | Strip Coupling | |
73C | Special Coupling (Threaded) | |
73D | Short Coupling | |
75 | Fishplate | |
76 | Fork Centre | |
77 | 18½" Perforated Angle Girder | |
78 | 24½" Perforated Angle Girder | |
82 | Bell Crank with Boss |