Meccano Set Parts Lists

UK MECCANO SET PARTS LIST
Outfit 7 (1928)

Compiled by Timothy Edwards


 
 
Outfit 7 (1928)
Set P/N Modern P/N Part Description Quantity
1 Perforated strip 12 1/2" 25hole 50
1a Perforated strip 9 1/2" 19hole 12
1b Perforated strip 7 1/2" 15hole 4
2 Perforated strip 5 1/2" 11hole 75
2a Perforated strip 4 1/2" 9hole 12
3 Perforated strip 3 1/2" 7hole 24
4 Perforated strip 3" 6hole 36
5 Perforated strip 2 1/2" 5hole 120
6 Perforated strip 2" 4hole 36
6a Perforated strip 1 1/2" 3hole 14
7 Angle girder 24 1/2" 49hole 12
7a Angle girder 18 1/2" 37hole 6
8 Angle girder 12 1/2" 25hole 26
8a Angle girder 9 1/2" 19hole 12
8b Angle girder 7 1/2" 15hole 4
9 Angle girder 5 1/2" 11hole 24
9a Angle girder 4 1/2" 9hole 8
9b Angle girder 3 1/2" 7hole 7
9c Angle girder 3" 6hole 3
9d Angle girder 2 1/2" 5hole 6
9e Angle girder 2" 4hole 2
9f Angle girder 1 1/2" 3hole 4
10 Flat Bracket (Fishplate) 24
11 Double Angle Bracket 12
12 Angle bracket 96
12a Angle bracket 1x1" 12
12b Angle bracket 1x1/2" 8
13 Axle rod 11 1/2" 4
13a Axle rod 8" 13
14 Axle rod 6 1/2" 13
15 Axle rod 5" 6
15a Axle rod 4 1/2" 6
16 Axle rod 3 1/2" 12
16a Axle rod 2 1/2" 4
16b Axle rod 3" 2
17 Axle rod 2" 12
18a Axle rod 1 1/2" 9
18b Axle rod 1" 7
19 19hCrank handle - large (5") 3
19a Spoked Wheel 3", with boss 4
19b Pulley 3" dia, 4
19s Crank handle - small (3 1/2") 1
20 Flanged wheel 1 1/8" dia 12
20a Pulley 2" dia 6
20b Flanged wheel 3/4" dia] 10
21 Pulley 1 1/2" dia 4
22 Pulley 1" dia 10
22a Pulley 1" dia without boss 15
23 23bPulley 1/2" dia without boss - metal 10
23a Pulley 1/2" dia with boss 4
24 Bush wheel 1 3/8" dia, 8 holes 5
25 Pinion 3/4"dia, 1/4"face, 25t 5
26 Pinion 1/2"dia, 1/4"face, 19t 9
27 Gear wheel 1 1/4"dia, 50t 5
27a Gear wheel 1 1/2"dia,57t 8
27b Gear wheel 3 1/2"dia, 133t 1
28 Contrate Gear 1 1/2" dia, 50t 3
29 Contrate Gear 3/4" dia, 25t 4
30 Bevel Gear 7/8"dia, 26t 4
30a Bevel Gear 1/2"dia, 16t 2
30c Bevel Gear 1 1/2"dia, 48t 2
31 Gear Wheel 1"dia, 1/4"face, 38t 4
32 Worm Gear 2
34 Spanner 2
35 Spring clip 36
36 Screwdriver - Standard Bent Rod 1
36b Screwdriver - Special (steel handled) 1
37 Square Nut and bolt (bolt 7/32" long) 594
37a Square Nut 6
38 Washer 3/8" dia. 200
40 Hank of cord 6
41 Propeller Blade - type 2 4
43 Tension Spring 2" 15
44 Cranked bent strip 3
45 Double bent strip 6
46 Double angle strip 2 1/2x1" 4
47 Double angle strip 2 1/2x1 1/2" 2
47a Double angle strip 3x1 1/2" 2
48 Double angle strip 1 1/2x1/2" 8
48a Double angle strip 2 1/2x1/2" 18
48b Double angle strip 3 1/2x1/2" 12
48c Double angle strip 4 1/2x1/2" 4
48d Double angle strip 5 1/2x1/2" 5
50 Eye piece without boss 2
52 Flanged Plate 5 1/2x2 1/2" - 4 flanges (See Note below) 7
52a Flat plate 5 1/2x3 1/2" 8
53 Flanged plate 3 1/2x2 1/2" 10
53a Flat plate 4 1/2x2 1/2" 3
54 Flanged sector plate 4" 4
55a Slotted Strip 2" 1
57 Wire Hook 17
57a Scientific Hook 6
57b Loaded Hook (large) - ball type 2
58 Spring cord 40" 1
59 Collar 55
61 Windmill sail 4
62 Crank 15
62a Threaded Crank 2
63 Coupling 13
63b Strip Coupling 2
64 Threaded boss 8
65 Centre fork 6
66 Weight, 50 gramme 5
67 Weight, 25 gramme 5
70 Flat plate 5 1/2x2 1/2" 6
72 Flat plate 2 1/2x2 1/2" 4
76 Trangular plate 2 1/2" 8
77 Trangular plate 1" 10
78 Screwed rod 11 1/2" 2
80 Screwed rod 5" 2
80a Screwed rod 3 1/2" 2
80b Screwed rod 4 1/2" 2
81 Screwed rod 2" 2
82 Screwed rod 1" 4
89 Curved strip 5 1/2", 10"r 6
90 Curved strip 2 1/2", 2 3/8"r 16
90a Curved strip stepped, 2 1/2", 1 3/8r 6
94 Sprocket chain 20ft
95 Sprocket wheel 2"d, 36t 3
95a Sprocket wheel 1 1/2"d, 28t 4
95b Sprocket wheel 3"d, 56t 2
96 Sprocket wheel 1"d, 18t 10
96a Sprocket wheel 3/4"d, 14t 3
97 Braced girder 3 1/2" 7hole - double closed 5
98 Braced girder 2 1/2" 5hole - double closed 8
99 Braced girder 12 1/2" 25hole - double closed 18
99a Braced girder 9 1/2" 19hole - double closed 2
100 Braced girder 5 1/2" 11hole - double closed 16
101 Hearld, for loom 48
102 Single bent strip 4
103 Flat girder 5 1/2" 11hole 6
103a Flat girder 9 1/2" 19hole 4
103b Flat girder 12 1/2" 25hole 2
103d Flat girder 3 1/2" 7hole 5
103e Flat girder 3" 6hole 1
103f Flat girder 2 1/2" 5hole 2
103h Flat girder 1 1/2" 3hole 3
103k Flat girder 7 1/2" 15hole 2
104 Shuttle, for loom 1
105 Reed hook, for loom 1
106 Wooden roller 2
106a Sand roller 1
107 Table for designing machine 1
108 Architrave (Corner Gusset) 8
109 Face plate 2 1/2"d 4
110 Rack strip 3 1/2" 4
111 Bolt 3/4" 7
111a Bolt 1/2" 8
111c Bolt 3/8" 12
113 Girder frame 4
114 Hinge 2
115 Threaded pin - Square Shoulder 9
116 Fork piece, Large 2
116a Fork piece, Small 1
118 Hub disc 5 1/2" dia 4
119 Channel segment 45deg arc, 11 1/2"dia 8
120a Sprung Buffer 4
120b Compression spring 2
121 Train Coupling, Type 3 - pressed steel 2
122 Miniature loaded sack 12
123 Cone pulley 1
124 Reverse angle bracket 1" 4
125 Reverse angle bracket 1/2" 9
126 Trunnion 4
126a Flat trunnion 8
128 Bell Crank with boss 2
129 Rack segment 90deg arc, 3"dia 4
130 Eccentric, Triple Throw 2
131 Dredger bucket 5
132 Flywheel 2 3/4" dia 1
133 Corner bracket 1/12" 8
134 Crank shaft 1" stroke 1
135 Theodolite protractor 1
136 Handrail Support 4
137 Wheel flange 4
138a 138Ship's funnel - raked 2
140 Universal coupling 5
141 Wire line for clocks 1
142 Rubber ring for 3" dia pulley 3
142b Tyre for 3" dia pulley 4
143 Circular girder 5 1/2" dia 1
144 Dog clutch 1
145 Circular strip 7" dia 1
147a Pawl with boss 2
147b Pivot Bolt with nuts 6
148 Ratchet wheel 2
149 Collector shoes for Loco 1
155 Flexible ring 5/8" dia 1
157 Fan 2" dia 1
159 Circular saw 1
160 Channel bearing 1
162 Boiler complete 1
163 Sleeve piece 2
164 Chimney adapter 1
165 Swivel bearing 2
166 End bearing 1
169 Digger Bucket 1
301 181Bobbins 2
302 182Insulating brushes 12
303 1570/182aInsulating washers (also #1570) 12
304 15756 b.a.screw (also #1575) 14
305 15836 b.a. nut (also #1583) 30
306 1563Terminals (also #1563) 4
307 Contact screws 2
308 Pole pieces 2
309 Coil cheeks 2
310 183Lamp holder (also #183) 1
311 184cLamps 1
312 27 swg iron wire 1
313 26 swg SCC wire (50 yards) 1
314 23 swg SCC wire (25 yards) 1
315 Bare copper wire (4 yards) 1
? Accumulator 4V 1
No.1A Clockwork Motor Reversing (Num from 31/2) 1
No.1 Electric motor 4V Reversing 1
Electric Outfit Manual 1
56c Standard Mechanisms 1
SML.1 Super Model Leaflet - Motor Chassis 1
SML.2 Super Model Leaflet - Ship Coaler 1
SML.3 Super Model Leaflet - Motorcycle & Sidecar 1
SML.5 Super Model Leaflet - Travelling Bucket Dredger 1
SML.6 Super Model Leaflet - Stiff-Leg Derrick 1
SML.7 Super Model Leaflet - Platform Scales 1
SML.9 Super Model Leaflet - Bagatelle Table 1
SML.10 Super Model Leaflet - Log Saw 1
SML.11 Super Model Leaflet - Horizontal Steam Engine 1
SML.12 Super Model Leaflet - Stone Sawing Machine 1
SML.13 Super Model Leaflet - Meccanograph 1
SML.14 Super Model Leaflet - Grandfather Clock 1
SML.16 Super Model Leaflet - Loom 1
SML.17 Super Model Leaflet - Planing Machine 1
SML.18 Super Model Leaflet - Revolving Crane 1
SML.19 Super Model Leaflet - Steam Shovel 1
SML.20 Super Model Leaflet - Mobile Crane 1
SML.21 Super Model Leaflet - Transporter Bridge 1
SML.22 Super Model Leaflet - Traction Engine 1
SML.23 Super Model Leaflet - Vertical Log Saw 1
SML.24 Super Model Leaflet - Travelling Gantry Crane 1
SML.25 Super Model Leaflet - Hydraulic Crane 1
SML.26 Super Model Leaflet - Twin-Elliptic Harmonograph 1

NOTES

1. The 5 1/2" x 2 1/2" flanged plates initially had two flanges on the long sides. The four flanged version was announced in the May 1928 Meccano Magazine. Whilst these lists assume that this happened in 1928, this is not necessarily certain and there might well have been a delay whilst old stock was used up. This especially applies to sets for overseas. There is some evidence to suggest that the 1930 Outfit 000 had the two flanged version.

2. From 1927 to 1934 the 5 1/2" x 2 1/2" flanged plates (both two & four flanged versions) also had a sawcut and slot to accommodate the circular saw (Part No. 159).

3. Originally all bosses were single tapped. In 1926/7 all bosses became double tapped.