Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit 7 (1934)
Compiled by Timothy Edwards
Outfit 7 (1934) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 38 | |||
1a | Perforated strip 9 1/2" 19hole | 16 | |||
1b | Perforated strip 7 1/2" 15hole | 13 | |||
2 | Perforated strip 5 1/2" 11hole | 40 | |||
2a | Perforated strip 4 1/2" 9hole | 12 | |||
3 | Perforated strip 3 1/2" 7hole | 24 | |||
4 | Perforated strip 3" 6hole | 24 | |||
5 | Perforated strip 2 1/2" 5hole | 120 | |||
6 | Perforated strip 2" 4hole | 30 | |||
6a | Perforated strip 1 1/2" 3hole | 14 | |||
7 | Angle girder 24 1/2" 49hole | 12 | |||
7a | Angle girder 18 1/2" 37hole | 6 | |||
8 | Angle girder 12 1/2" 25hole | 26 | |||
8a | Angle girder 9 1/2" 19hole | 17 | |||
8b | Angle girder 7 1/2" 15hole | 8 | |||
9 | Angle girder 5 1/2" 11hole | 24 | |||
9a | Angle girder 4 1/2" 9hole | 15 | |||
9b | Angle girder 3 1/2" 7hole | 7 | |||
9c | Angle girder 3" 6hole | 3 | |||
9d | Angle girder 2 1/2" 5hole | 7 | |||
9e | Angle girder 2" 4hole | 2 | |||
9f | Angle girder 1 1/2" 3hole | 4 | |||
10 | Flat Bracket (Fishplate) | 30 | |||
11 | Double Angle Bracket | 12 | |||
12 | Angle bracket | 76 | |||
12a | Angle bracket 1x1" | 12 | |||
12b | Angle bracket 1x1/2" | 16 | |||
13 | Axle rod 11 1/2" | 8 | |||
13a | Axle rod 8" | 7 | |||
14 | Axle rod 6 1/2" | 13 | |||
15 | Axle rod 5" | 6 | |||
15a | Axle rod 4 1/2" | 6 | |||
16 | Axle rod 3 1/2" | 12 | |||
16a | Axle rod 2 1/2" | 13 | |||
16b | Axle rod 3" | 5 | |||
17 | Axle rod 2" | 12 | |||
18a | Axle rod 1 1/2" | 9 | |||
18b | Axle rod 1" | 7 | |||
19 | 19h | Crank handle - large (5") | 3 | ||
19a | Spoked Wheel 3", with boss | 4 | |||
19b | Pulley 3" dia, | 4 | |||
19s | Crank handle - small (3 1/2") | 1 | |||
20 | Flanged wheel 1 1/8" dia | 12 | |||
20a | Pulley 2" dia | 4 | |||
20b | Flanged wheel 3/4" dia] | 10 | |||
21 | Pulley 1 1/2" dia | 4 | |||
22 | Pulley 1" dia | 10 | |||
22a | Pulley 1" dia without boss | 15 | |||
23 | 23b | Pulley 1/2" dia without boss - metal | 6 | ||
23a | Pulley 1/2" dia with boss | 4 | |||
24 | Bush wheel 1 3/8" dia, 8 holes | 8 | |||
25 | Pinion 3/4"dia, 1/4"face, 25t | 5 | |||
26 | Pinion 1/2"dia, 1/4"face, 19t | 9 | |||
26a | Pinion 1/2"dia, 1/2"face, 19t | 2 | |||
27 | Gear wheel 1 1/4"dia, 50t | 5 | |||
27a | Gear wheel 1 1/2"dia,57t | 7 | |||
27b | Gear wheel 3 1/2"dia, 133t | 2 | |||
28 | Contrate Gear 1 1/2" dia, 50t | 2 | |||
29 | Contrate Gear 3/4" dia, 25t | 2 | |||
30 | Bevel Gear 7/8"dia, 26t | 4 | |||
30a | Bevel Gear 1/2"dia, 16t | 2 | |||
30c | Bevel Gear 1 1/2"dia, 48t | 2 | |||
31 | Gear Wheel 1"dia, 1/4"face, 38t | 4 | |||
32 | Worm Gear | 2 | |||
34 | Spanner | 2 | |||
35 | Spring clip | 36 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
36b | Screwdriver - Special (steel handled) | 1 | |||
37 | Square Nut and bolt (bolt 7/32" long) | 594 | |||
37a | Square Nut | 6 | |||
38 | Washer 3/8" dia. | 200 | |||
40 | Hank of cord | 6 | |||
41 | Propeller Blade - type 2 | 4 | |||
43 | Tension Spring 2" | 9 | |||
44 | Cranked bent strip | 3 | |||
45 | Double bent strip | 6 | |||
46 | Double angle strip 2 1/2x1" | 4 | |||
47 | Double angle strip 2 1/2x1 1/2" | 2 | |||
47a | Double angle strip 3x1 1/2" | 2 | |||
48 | Double angle strip 1 1/2x1/2" | 8 | |||
48a | Double angle strip 2 1/2x1/2" | 18 | |||
48b | Double angle strip 3 1/2x1/2" | 12 | |||
48c | Double angle strip 4 1/2x1/2" | 4 | |||
48d | Double angle strip 5 1/2x1/2" | 5 | |||
50a | 50 | Eye piece with boss | 2 | ||
52 | Flanged Plate 5 1/2x2 1/2" - 4 flanges (See Note below) | 7 | |||
52a | Flat plate 5 1/2x3 1/2" | 11 | |||
53 | Flanged plate 3 1/2x2 1/2" | 7 | |||
53a | Flat plate 4 1/2x2 1/2" | 6 | |||
54 | Flanged sector plate 4" | 4 | |||
55a | Slotted Strip 2" | 2 | |||
57b | Loaded Hook (large) - ball type | 1 | |||
57c | Loaded Hook (small) - ball Type | 14 | |||
58 | Spring cord 40" | 1 | |||
58a | Coupling Screw for Spring Cord | 12 | |||
59 | Collar | 63 | |||
62 | Crank | 14 | |||
62a | Threaded Crank | 2 | |||
62b | Double Arm Crank | 6 | |||
63 | Coupling | 13 | |||
63b | Strip Coupling | 2 | |||
64 | Threaded boss | 4 | |||
65 | Centre fork | 6 | |||
70 | Flat plate 5 1/2x2 1/2" | 7 | |||
72 | Flat plate 2 1/2x2 1/2" | 4 | |||
76 | Trangular plate 2 1/2" | 8 | |||
77 | Trangular plate 1" | 10 | |||
78 | Screwed rod 11 1/2" | 2 | |||
80 | Screwed rod 5" | 2 | |||
80a | Screwed rod 3 1/2" | 2 | |||
80b | Screwed rod 4 1/2" | 2 | |||
81 | Screwed rod 2" | 2 | |||
82 | Screwed rod 1" | 8 | |||
89 | Curved strip 5 1/2", 10"r | 6 | |||
90 | Curved strip 2 1/2", 2 3/8"r | 16 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 10 | |||
94 | Sprocket chain | 20ft | |||
95 | Sprocket wheel 2"d, 36t | 3 | |||
95a | Sprocket wheel 1 1/2"d, 28t | 4 | |||
95b | Sprocket wheel 3"d, 56t | 2 | |||
96 | Sprocket wheel 1"d, 18t | 10 | |||
96a | Sprocket wheel 3/4"d, 14t | 5 | |||
97 | Braced girder 3 1/2" 7hole - double closed | 5 | |||
98 | Braced girder 2 1/2" 5hole - double closed | 8 | |||
99 | Braced girder 12 1/2" 25hole - double closed | 18 | |||
99a | Braced girder 9 1/2" 19hole - double closed | 2 | |||
99b | Braced girder 7 1/2" 15hole - double closed | 1 | |||
100 | Braced girder 5 1/2" 11hole - double closed | 16 | |||
101 | Hearld, for loom | 60 | |||
102 | Single bent strip | 4 | |||
103 | Flat girder 5 1/2" 11hole | 7 | |||
103a | Flat girder 9 1/2" 19hole | 4 | |||
103b | Flat girder 12 1/2" 25hole | 12 | |||
103c | Flat girder 4 1/2" 9hole | 4 | |||
103d | Flat girder 3 1/2" 7hole | 5 | |||
103e | Flat girder 3" 6hole | 6 | |||
103f | Flat girder 2 1/2" 5hole | 7 | |||
103g | Flat girder 2" 4hole | 2 | |||
103h | Flat girder 1 1/2" 3hole | 6 | |||
103k | Flat girder 7 1/2" 15hole | 2 | |||
104 | Shuttle, for loom | 1 | |||
105 | Reed hook, for loom | 1 | |||
106 | Wooden roller | 2 | |||
106a | Sand roller | 1 | |||
107 | Table for designing machine | 1 | |||
108 | Architrave (Corner Gusset) | 6 | |||
109 | Face plate 2 1/2"d | 11 | |||
110 | Rack strip 3 1/2" | 4 | |||
111 | Bolt 3/4" | 18 | |||
111a | Bolt 1/2" | 24 | |||
111c | Bolt 3/8" | 12 | |||
114 | Hinge | 2 | |||
115 | Threaded pin - Square Shoulder | 9 | |||
116 | Fork piece, Large | 2 | |||
116a | Fork piece, Small | 4 | |||
118 | Hub disc 5 1/2" dia | 4 | |||
119 | Channel segment 45deg arc, 11 1/2"dia | 16 | |||
120a | Sprung Buffer | 6 | |||
120b | Compression spring | 4 | |||
121 | Train Coupling, Type 3 - pressed steel | 2 | |||
124 | Reverse angle bracket 1" | 4 | |||
125 | Reverse angle bracket 1/2" | 9 | |||
126 | Trunnion | 4 | |||
126a | Flat trunnion | 8 | |||
128 | Bell Crank with boss | 2 | |||
129 | Rack segment 90deg arc, 3"dia | 4 | |||
130 | Eccentric, Triple Throw | 2 | |||
131 | Dredger bucket | 5 | |||
132 | Flywheel 2 3/4" dia | 1 | |||
133 | Corner bracket 1/12" | 8 | |||
135 | Theodolite protractor | 1 | |||
136 | Handrail Support | 8 | |||
137 | Wheel flange | 10 | |||
140 | Universal coupling | 2 | |||
141 | Wire line for clocks | 1 | |||
142 | Rubber ring for 3" dia pulley | 3 | |||
142a | Tyre for 2" dia pulley | 4 | |||
142b | Tyre for 3" dia pulley | 4 | |||
143 | Circular girder 5 1/2" dia | 1 | |||
144 | Dog clutch | 1 | |||
145 | Circular strip 7 1/2" dia | 2 | |||
146 | Circular plate 6" dia | 2 | |||
147a | Pawl with boss | 4 | |||
147b | Pivot Bolt with nuts | 8 | |||
148 | Ratchet wheel | 2 | |||
155 | Flexible ring 5/8" dia | 2 | |||
157 | Fan 2" dia | 1 | |||
160 | Channel bearing | 1 | |||
161 | Girder bracket | 2 | |||
162 | Boiler complete | 1 | |||
162a | Boiler End | 1 | |||
163 | Sleeve piece | 3 | |||
164 | Chimney adapter | 2 | |||
165 | Swivel bearing | 2 | |||
166 | End bearing | 6 | |||
168 | Ball thrust bearing | 1 | |||
170 | 130a | Eccentric, Single Throw | 1 | ||
171 | Socket coupling | 1 | |||
172 | Pendulum connections | 1 | |||
181 | Bobbins | 2 | |||
182 | Insulating brushes | 8 | |||
1563 | Terminals | 3 | |||
1570 | 182a | Insulating washers | 8 | ||
1575 | 6 b.a.screw | 9 | |||
1583 | 6 b.a. nut | 15 | |||
No.2 | Clockwork Motor Reversing | 1 | |||
E6 | Electric motor 6V Reversing | 1 | |||
56c | Standard Mechanisms | 1 | |||
How to use Meccano Parts | 1 | ||||
SML.1 | Super Model Leaflet - Motor Chassis | 1 | |||
SML.2 | Super Model Leaflet - Ship Coaler | 1 | |||
SML.3 | Super Model Leaflet - Motorcycle & Sidecar | 1 | |||
SML.5 | Super Model Leaflet - Travelling Bucket Dredger | 1 | |||
SML.6 | Super Model Leaflet - Stiff-Leg Derrick | 1 | |||
SML.7 | Super Model Leaflet - Platform Scales | 1 | |||
SML.9 | Super Model Leaflet - Bagatelle Table | 1 | |||
SML.10 | Super Model Leaflet - Log Saw | 1 | |||
SML.11 | Super Model Leaflet - Horizontal Steam Engine | 1 | |||
SML.12 | Super Model Leaflet - Stone Sawing Machine | 1 | |||
SML.13 | Super Model Leaflet - Meccanograph | 1 | |||
SML.14a | Super Model Leaflet - Grandfather Clock | 1 | |||
SML.16a | Super Model Leaflet - Loom | 1 | |||
SML.17 | Super Model Leaflet - Planing Machine | 1 | |||
SML.18 | Super Model Leaflet - Revolving Crane | 1 | |||
SML.19 | Super Model Leaflet - Steam Shovel | 1 | |||
SML.20 | Super Model Leaflet - Mobile Crane | 1 | |||
SML.21 | Super Model Leaflet - Transporter Bridge | 1 | |||
SML.22 | Super Model Leaflet - Traction Engine | 1 | |||
SML.23 | Super Model Leaflet - Vertical Log Saw | 1 | |||
SML.24 | Super Model Leaflet - Travelling Gantry Crane | 1 | |||
SML.25 | Super Model Leaflet - Hydraulic Crane | 1 | |||
SML.26 | Super Model Leaflet - Twin-Elliptic Harmonograph | 1 | |||
SML.28 | Super Model Leaflet - Pontoon Crane | 1 | |||
SML.29 | Super Model Leaflet - Hammerhead Crane | 1 | |||
SML.30 | Super Model Leaflet - Breakdown Crane | 1 | |||
SML.31 | Super Model Leaflet - Warehouse with Elevators | 1 | |||
SML.35 | Super Model Leaflet - Automatic Grabbing Crane | 1 | |||
SML.36 | Super Model Leaflet - Electric Derrick Crane | 1 | |||
SML.37 | Super Model Leaflet - Howitzer, Limber & Tractor | 1 |
NOTES
1. The 5 1/2" x 2 1/2" flanged plates initially had two flanges on the long sides. The four flanged version was announced in the May 1928 Meccano Magazine. Whilst these lists assume that this happened in 1928, this is not necessarily certain and there might well have been a delay whilst old stock was used up. This especially applies to sets for overseas. There is some evidence to suggest that the 1930 Outfit 000 had the two flanged version.
2. From 1927 to 1934 the 5 1/2" x 2 1/2" flanged plates (both two & four flanged versions) also had a sawcut and slot to accommodate the circular saw (Part No. 159).
3. Originally all bosses were single tapped. In 1926/7 all bosses became double tapped.