Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit 10 (1938-41)
Compiled by Timothy Edwards
Outfit 10 (1938-41) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 24 | |||
1a | Perforated strip 9 1/2" 19hole | 6 | |||
1b | Perforated strip 7 1/2" 15hole | 6 | |||
2 | Perforated strip 5 1/2" 11hole | 36 | |||
2a | Perforated strip 4 1/2" 9hole | 8 | |||
3 | Perforated strip 3 1/2" 7hole | 18 | |||
4 | Perforated strip 3" 6hole | 12 | |||
5 | Perforated strip 2 1/2" 5hole | 72 | |||
6 | Perforated strip 2" 4hole | 12 | |||
6a | Perforated strip 1 1/2" 3hole | 10 | |||
7 | Angle girder 24 1/2" 49hole | 8 | |||
7a | Angle girder 18 1/2" 37hole | 6 | |||
8 | Angle girder 12 1/2" 25hole | 16 | |||
8a | Angle girder 9 1/2" 19hole | 6 | |||
8b | Angle girder 7 1/2" 15hole | 4 | |||
9 | Angle girder 5 1/2" 11hole | 12 | |||
9a | Angle girder 4 1/2" 9hole | 8 | |||
9b | Angle girder 3 1/2" 7hole | 6 | |||
9c | Angle girder 3" 6hole | 4 | |||
9d | Angle girder 2 1/2" 5hole | 8 | |||
9e | Angle girder 2" 4hole | 2 | |||
9f | Angle girder 1 1/2" 3hole | 4 | |||
10 | Flat bracket/fishplate | 24 | |||
11 | Double angle bracket 1/2" x 1/2" | 12 | |||
12 | Angle bracket | 50 | |||
12a | Angle bracket 1" x 1" | 8 | |||
12b | Angle bracket 1" x 1/2" | 8 | |||
12c | Obtuse Angle bracket | 12 | |||
13 | Axle rod 11 1/2" | 2 | |||
13a | Axle rod 8" | 4 | |||
14 | Axle rod 6 1/2" | 4 | |||
15 | Axle rod 5" | 6 | |||
15a | Axle rod 4 1/2" | 6 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 8 | |||
16a | Axle rod 2 1/2" | 6 | |||
16b | Axle rod 3" | 4 | |||
17 | Axle rod 2" | 8 | |||
18a | Axle rod 1 1/2" | 6 | |||
18b | Axle rod 1" | 4 | |||
19b | Pulley wheel 3" dia | 6 | |||
19g | Crank handle 3 1/2" w/grip | 2 | |||
19h | Crank handle 5" w/grip | 1 | |||
20 | Flanged wheel 1 1/8'd 4hole | 4 | |||
20a | Pulley 2" dia | 6 | |||
20b | Flanged wheel 3/4" | 4 | |||
21 | Pulley 1 1/2" | 2 | |||
22 | Pulley 1" | 8 | |||
22a | Pulley 1" w/o boss | 6 | |||
23 | 23b | Pulley 1/2" w/o boss - metal | 4 | ||
23a | Pulley 1/2" w/boss | 2 | |||
24 | Bush wheel 1 3/8" dia, 8 holes | 4 | |||
25 | Pinion 3/4"d, 1/4"face, 25t | 4 | |||
25a | Pinion 3/4"d, 1/2"face, 25t | 1 | |||
26 | Pinion 1/2"d, 1/4"face, 19t | 6 | |||
26a | Pinion 1/2"d, 1/2"face, 19t | 1 | |||
26b | Pinion 1/2"d, 3/4"face, 19t | 1 | |||
27 | Gear wheel 1 1/4"d, 50t | 2 | |||
27a | Gear wheel 1 1/2"d,57t | 4 | |||
27b | Gear wheel 3 1/2"d, 133t | 1 | |||
27c | Gear wheel 2 1/2"d, 95t | 1 | |||
28 | Contrate Gear 1 1/2" | 2 | |||
29 | Contrate Gear 3/4" | 2 | |||
30 | Bevel Gear 7/8" dia, 26t | 4 | |||
30a | Bevel Gear 1/2" dia, 16t | 1 | |||
30c | Bevel Gear 1 1/2"" dia, 48t | 1 | |||
31 | Gear Wheel 1"d, 1/4"face, 38t | 2 | |||
32 | Worm | 2 | |||
34 | Square spanner | 2 | |||
34b | Box spanner - Square | 1 | |||
35 | Spring clip | 36 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
36b | Screwdriver - Special (steel handled) | 1 | |||
37a | Nut, square (See note below) | 650 | |||
37b | Bolt, 7/32" long | 600 | |||
38 | Washer 3/8" | 75 | |||
40 | Hank of cord | 6 | |||
41 | Propeller blade | 4 | |||
43 | Tension Spring 2" | 4 | |||
44 | Cranked strip stepped | 2 | |||
45 | Double bent strip | 4 | |||
46 | Double angle strip 2 1/2x1" | 4 | |||
47 | Double angle strip 2 1/2x1 1/2" | 2 | |||
47a | Double angle strip 3x1 1/2" | 2 | |||
48 | Double angle strip 1 1/2x1/2" | 4 | |||
48a | Double angle strip 2 1/2x1/2" | 12 | |||
48b | Double angle strip 3 1/2x1/2" | 8 | |||
48c | Double angle strip 4 1/2x1/2" | 4 | |||
48d | Double angle strip 5 1/2x1/2" | 4 | |||
50a | 50 | Eye piece with boss | 2 | ||
51 | Flanged plate 2 1/2x1 1/2" | 2 | |||
52 | Flanged plate 5 1/2x2 1/2" - 4 flanges | 4 | |||
52a | Flat plate 5 1/2x3 1/2" | 6 | |||
53 | Flanged plate 3 1/2x2 1/2" | 6 | |||
53a | Flat plate 4 1/2x2 1/2" | 4 | |||
54a | 54 | Flanged sector plate 4 1/2" | 2 | ||
55a | Perforated strip, slotted 2" | 2 | |||
57b | Loaded Hook (large) - ball type | 1 | |||
57c | Loaded Hook (small) - ball type | 2 | |||
59 | Collar | 24 | |||
62 | Crank | 4 | |||
62a | Threaded Crank | 1 | |||
62b | Double Arm Crank | 4 | |||
63 | Coupling | 8 | |||
64 | Threaded boss | 2 | |||
65 | Centre fork | 1 | |||
69c | Grup Screw 7/64" | 12 | |||
70 | Flat plate 5 1/2x2 1/2" | 4 | |||
72 | Flat plate 2 1/2x2 1/2" | 2 | |||
76 | Trangular plate 2 1/2" | 4 | |||
77 | Trangular plate 1" | 4 | |||
78 | Screwed rod 11 1/2" | 1 | |||
80a | Screwed rod 3 1/2" | 1 | |||
80c | Screwed rod 3" | 2 | |||
81 | Screwed rod 2" | 2 | |||
82 | Screwed rod 1" | 2 | |||
89 | Curved strip 5 1/2", 10"r | 12 | |||
89a | Curved strip stepped, 3", 1 3/4"r | 6 | |||
89b | Curved strip stepped 4", 4 1/2"r | 8 | |||
90 | Curved strip 2 1/2", 2 3/8"r | 12 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 8 | |||
94 | Sprocket chain, 40" | 2 | |||
95 | Sprocket wheel 2"d, 36t | 2 | |||
95a | Sprocket wheel 1 1/2"d, 28t | 2 | |||
95b | Sprocket wheel 3"d, 56t | 2 | |||
96 | Sprocket wheel 1"d, 18t | 4 | |||
96a | Sprocket wheel 3/4"d, 14t | 2 | |||
100 | Braced girder 5 1/2" 11hole - double closed | 2 | |||
102 | Single bent strip | 4 | |||
103 | Flat girder 5 1/2" 11hole | 4 | |||
103a | Flat girder 9 1/2" 19hole | 4 | |||
103b | Flat girder 12 1/2" 25hole | 4 | |||
103c | Flat girder 4 1/2" 9hole | 2 | |||
103d | Flat girder 3 1/2" 7hole | 2 | |||
103e | Flat girder 3" 6hole | 2 | |||
103f | Flat girder 2 1/2" 5hole | 4 | |||
103g | Flat girder 2" 4hole | 2 | |||
103h | Flat girder 1 1/2" 3hole | 4 | |||
103k | Flat girder 7 1/2" 15hole | 4 | |||
108 | Corner Gusset | 4 | |||
109 | Face plate 2 1/2" dia | 4 | |||
110 | Rack strip 3 1/2" | 2 | |||
111 | Bolt 3/4" | 18 | |||
111a | Bolt 1/2" | 18 | |||
111c | Bolt 3/8" | 24 | |||
114 | Hinge | 2 | |||
115 | Threaded pin - square shoulder | 4 | |||
116 | Fork piece, large | 2 | |||
116a | Fork piece, small | 2 | |||
117 | 168d | Steel Ball 3/8" dia | 24 | ||
118 | Hub disc 5 1/2" | 2 | |||
120b | Compression spring | 4 | |||
124 | Reverse angle bracket 1" | 4 | |||
125 | Reverse angle bracket 1/2" | 6 | |||
126 | Trunnion | 8 | |||
126a | Flat trunnion | 12 | |||
128 | Bell Crank with boss | 2 | |||
129 | Rack segment 90deg arc, 3"d | 1 | |||
130 | Eccentric triple throw | 2 | |||
132 | Flywheel | 1 | |||
133 | Corner bracket 1 1/2" | 4 | |||
133a | Corner bracket 1" | 2 | |||
134 | Crank shaft 1" stroke | 1 | |||
136 | Handrail support | 4 | |||
136a | Handrail coupling | 1 | |||
137 | Wheel flange | 4 | |||
140 | Universal coupling | 2 | |||
142a | Tyre for 2" pulley | 6 | |||
142b | Tyre for 3" pulley | 6 | |||
143 | Circular Girder | 2 | |||
144 | Dog clutch | 1 | |||
145 | Circular strip 7 1/2" dia | 2 | |||
146 | Circular plate 6" dia | 2 | |||
146a | Circular plate 4" dia | 2 | |||
147a | Pawl with boss | 1 | |||
147b | Pivot Bolt with nuts | 6 | |||
147c | Pawl without boss | 2 | |||
154a | Corner angle bracket, right hand | 1 | |||
154b | Corner angle bracket, left hand | 1 | |||
155a | Rubber Ring for 1" pulley - white | 8 | |||
157 | Fan | 1 | |||
160 | Channel bearing | 2 | |||
161 | Girder bracket | 2 | |||
162 | Boiler complete | 2 | |||
162a | Boiler end | 2 | |||
162b | Boiler without ends | 1 | |||
163 | Sleeve piece | 2 | |||
164 | Chimney adapter | 4 | |||
165 | Swivel bearing | 2 | |||
166 | End bearing | 2 | |||
167b | Flanged ring 9 7/8" dia | 2 | |||
168 | Ball thrust bearing | 1 | |||
169 | Digger Bucket | 1 | |||
170 | 130a | Eccentric 1/4" throw | 2 | ||
171 | Socket coupling | 1 | |||
175 | Flexible coupling unit | 1 | |||
176 | Anchoring spring for cord | 4 | |||
179 | Rod socket | 2 | |||
185 | Steering wheel 1 3/4" dia | 1 | |||
186 | Drive band 2 1/2" light | 3 | |||
186a | Drive band 6" light | 2 | |||
186b | Drive band 10" light | 2 | |||
186c | Drive band 10" heavy | 2 | |||
186d | Drive band 15" heavy | 2 | |||
186e | Drive band 20" heavy | 2 | |||
187 | Road wheel 2 1/2" - Metal | 4 | |||
188 | Flexible plate 2 1/2 x 1 1/2" (See note below) | 12 | |||
189 | Flexible plate 5 1/2 x 1 1/2" (See note below) | 12 | |||
190 | Flexible plate 2 1/2 x 2 1/2" (See note below) | 16 | |||
190a | Flexible plate 3 1/2 x 2 1/2" (See note below) | 4 | |||
191 | Flexible plate 4 1/2 x 2 1/2" (See note below) | 16 | |||
192 | Flexible plate 5 1/2 x 2 1/2" (See note below) | 30 | |||
196 | Strip plate 9 1/2 x 2 1/2" (See note below) | 4 | |||
197 | Strip plate 12 1/2 x 2 1/2" (See note below) | 20 | |||
198 | Hinged flat plate 4 1/2 x 2 1/2" | 1 | |||
199 | Curved plate 2 1/2 x 2 1/2" U section (See note below) | 12 | |||
200 | Curved plate 2 1/2 x 2 1/2" x 1 11/16" radius (See note below) | 12 | |||
212 | Rod and strip connector | 4 | |||
213 | Rod connector/axle tube | 2 | |||
214 | Semicircular plate | 4 | |||
215 | Formed slotted strip | 12 | |||
216 | Cylinder 2 1/2"x1 1/4" dia | 2 | |||
217a | 24a | Disk 1 1/4" dia | 4 | ||
217b | 38d | Disk 3/4" dia | 4 | ||
219 | 187a | Wheel Disk | 6 | ||
P52 | Aero Collar | 1 | |||
A1083 | 36c | Drift | 1 | ||
No.1 | Clockwork motor, Non reversing | 1 | |||
E120 | Electric Motor 20V | 1 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.