Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit 7 (1945-48)
Compiled by Timothy Edwards
Outfit 7 (1945-48) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 12 | |||
2 | Perforated strip 5 1/2" 11hole | 18 | |||
3 | Perforated strip 3 1/2" 7hole | 6 | |||
4 | Perforated strip 3" 6hole | 2 | |||
5 | Perforated strip 2 1/2" 5hole | 12 | |||
6a | Perforated strip 1 1/2" 3hole | 4 | |||
8 | Angle girder 12 1/2" 25hole | 8 | |||
10 | Flat bracket/fishplate | 12 | |||
11 | Double angle bracket 1/2" x 1/2" | 4 | |||
12 | Angle bracket | 18 | |||
12a | Angle bracket 1" x 1" | 4 | |||
12c | Obtuse Angle bracket | 6 | |||
13 | Axle rod 11 1/2" | 1 | |||
14 | Axle rod 6 1/2" | 1 | |||
15 | Axle rod 5" | 2 | |||
15a | Axle rod 4 1/2" | 3 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 4 | |||
17 | Axle rod 2" | 2 | |||
18a | Axle rod 1 1/2" | 4 | |||
18b | Axle rod 1" | 1 | |||
19b | Pulley wheel 3" dia | 2 | |||
19g | Crank handle 3 1/2" w/grip | 1 | |||
19h | Crank handle 5" w/grip | 1 | |||
20a | Pulley 2" dia | 2 | |||
20b | Flanged wheel 3/4" | 4 | |||
22 | Pulley 1" | 5 | |||
22a | Pulley 1" w/o boss | 2 | |||
23 | 23b | Pulley 1/2" w/o boss - metal | 1 | ||
23a | Pulley 1/2" w/boss | 1 | |||
24 | Bush wheel 1 3/8" dia, 8 holes | 1 | |||
24a | Wheel Disk 1 3/8" 8 holes | 4 | |||
26 | Pinion 1/2"d, 1/4"face, 19t | 2 | |||
27a | Gear wheel 1 1/2"d,57t | 1 | |||
32 | Worm | 1 | |||
34 | Square spanner | 2 | |||
35 | Spring clip | 18 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
36c | Drift | 1 | |||
37a | Nut, square (See note below) | 162 | |||
37b | Bolt, 7/32" long | 150 | |||
38 | Washer 3/8" | 26 | |||
38d | Washer 3/4" | 2 | |||
40 | Hank of cord | 3 | |||
43 | Tension Spring 2" | 1 | |||
44 | Cranked strip stepped | 1 | |||
45 | Double bent strip | 2 | |||
46 | Double angle strip 2 1/2x1" | 1 | |||
48 | Double angle strip 1 1/2x1/2" | 2 | |||
48a | Double angle strip 2 1/2x1/2" | 10 | |||
48b | Double angle strip 3 1/2x1/2" | 2 | |||
51 | Flanged plate 2 1/2x1 1/2" | 1 | |||
52 | Flanged plate 5 1/2x2 1/2" - 4 flanges | 2 | |||
53 | Flanged plate 3 1/2x2 1/2" | 3 | |||
54 | Flanged sector plate 4 1/2" | 2 | |||
57c | Loaded Hook (small) - ball type | 1 | |||
59 | Collar | 6 | |||
62 | Crank | 2 | |||
63 | Coupling | 1 | |||
80c | Screwed rod 3" | 2 | |||
90 | Curved strip 2 1/2", 2 3/8"r | 2 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 4 | |||
111 | Bolt 3/4" | 2 | |||
111a | Bolt 1/2" | 2 | |||
111c | Bolt 3/8" | 6 | |||
115 | Threaded pin - square shoulder | 2 | |||
116 | Fork piece, large | 1 | |||
125 | Reverse angle bracket 1/2" | 4 | |||
126 | Trunnion | 2 | |||
126a | Flat trunnion | 4 | |||
147b | Pivot Bolt with nuts | 1 | |||
155 | Rubber Ring for 1" pulley - black | 4 | |||
162 | Boiler complete | 1 | |||
163 | Sleeve piece | 2 | |||
164 | Chimney adapter | 1 | |||
176 | Anchoring spring for cord | 1 | |||
186 | Drive band 2 1/2" light | 3 | |||
186a | Drive band 6" light | 2 | |||
186b | Drive band 10" light | 2 | |||
187 | Road wheel 2 1/2" - Metal | 4 | |||
188 | Flexible plate 2 1/2 x 1 1/2" (See note below) | 6 | |||
189 | Flexible plate 5 1/2 x 1 1/2" (See note below) | 6 | |||
190 | Flexible plate 2 1/2 x 2 1/2" (See note below) | 8 | |||
191 | Flexible plate 4 1/2 x 2 1/2" (See note below) | 2 | |||
192 | Flexible plate 5 1/2 x 2 1/2" (See note below) | 6 | |||
197 | Strip plate 12 1/2 x 2 1/2" (See note below) | 2 | |||
198 | Hinged flat plate 4 1/2 x 2 1/2" | 1 | |||
199 | Curved plate 2 1/2 x 2 1/2" U section (See note below) | 2 | |||
200 | Curved plate 2 1/2 x 2 1/2" x 1 11/16" radius (See note below) | 2 | |||
212 | Rod and strip connector | 2 | |||
213 | Rod connector/axle tube | 2 | |||
214 | Semicircular plate | 2 | |||
215 | Formed slotted strip | 8 | |||
216 | Cylinder 2 1/2"x1 1/4" dia | 1 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.