Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Set S (later) (1978-81)
Compiled by Timothy Edwards
Set S (later) (1978-81) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
2 | Perforated strip 5 1/2" 11hole | 2 | |||
6 | Perforated strip 2" 5hole | 2 | |||
9 | Angle girder 5 1/2" 11hole | 2 | |||
9f | Angle girder 1 1/2" 3hole | 2 | |||
12b | Angle bracket 1" x 1/2" | 2 | |||
12c | Obtuse Angle bracket | 4 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 1 | |||
16a | Axle rod 2 1/2" | 1 | |||
18a | Axle rod 1 1/2" | 1 | |||
21 | Pulley 1 1/2" | 2 | |||
22 | Pulley 1" | 2 | |||
26 | Pinion 1/2"d, 1/4"face, 19t | 1 | |||
27a | Gear wheel 1 1/2"d,57t | 1 | |||
27f | Gear wheel multi-purpose | 2 | |||
35 | Spring clip | 4 | |||
37b | Bolt, 7/32" long | 27 | |||
37c | Nut, Hex (See note below) | 57 | |||
38 | Washer 3/8" | 20 | |||
48 | Double angle strip 1 1/2x1/2" | 2 | |||
48a | Double angle strip 2 1/2x1/2" | 4 | |||
48b | Double angle strip 3 1/2x1/2" | 2 | |||
69a | Grub Screw 5/32" | 6 | |||
70 | Flat plate 5 1/2x2 1/2" | 1 | |||
80c | Screwed rod 3" | 1 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 2 | |||
103f | Flat girder 2 1/2" 5hole | 1 | |||
111 | Bolt 3/4" | 3 | |||
111a | Bolt 1/2" | 12 | |||
111d | Bolt 1 1/8" | 2 | |||
115a | Thread Pin Long 1 3/8" - no shoulder | 1 | |||
133a | Corner bracket 1" | 2 | |||
160 | Channel bearing | 1 | |||
186a | Drive band 6" light | 2 | |||
187c | Road wheel - three part - complete | 4 | |||
189 | Flexible plate 5 1/2 x 1 1/2" (See note below) | 2 | |||
190a | Flexible plate 3 1/2 x 2 1/2" (See note below) | 1 | |||
193 | Transparent plate 2 1/2 x 1 1/2" | 2 | |||
215 | Formed slotted strip | 2 | |||
235 | Narrow strip 2 1/2 x 11/32" wide | 4 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.