Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
4EL Set (1970-72)
Compiled by Timothy Edwards
4EL Set (1970-72) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25hole | 2 | |||
2 | Perforated strip 5 1/2" 11hole | 6 | |||
5 | Perforated strip 2 1/2" 5hole | 9 | |||
10 | Flat bracket/fishplate | 10 | |||
11 | Double angle bracket 1/2" x 1/2" | 2 | |||
12 | Angle bracket | 12 | |||
12b | Angle bracket 1" x 1/2" | 2 | |||
12c | Obtuse Angle bracket | 2 | |||
15b | Axle rod 4" | 2 | |||
16 | Axle rod 3 1/2" | 3 | |||
16b | Axle rod 3" | 1 | |||
17 | Axle rod 2" | 2 | |||
18a | Axle rod 1 1/2" | 1 | |||
18b | Axle rod 1" | 1 | |||
19b | Pulley wheel 3" dia | 1 | |||
19s | Crank handle 3 1/2" without grip | 1 | |||
20a | Pulley 2" dia | 1 | |||
22 | Pulley 1" | 4 | |||
22a | Pulley 1" w/o boss | 2 | |||
23 | 23bp | Pulley 1/2" w/o boss - plastic | 1 | ||
24 | Bush wheel 1 3/8" dia, 8 holes | 2 | |||
24a | Wheel Disk 1 3/8" 8 holes | 2 | |||
27f | Gear wheel multi-purpose | 2 | |||
34 | Square spanner | 2 | |||
35 | Spring clip | 10 | |||
36 | Screwdriver - Standard Bent Rod | 1 | |||
37a | Nut, square (See note below) | 134 | |||
37b | Bolt, 7/32" long | 94 | |||
38 | Washer 3/8" | 56 | |||
38d | Washer 3/4" | 2 | |||
40 | Hank of cord | 1 | |||
48a | Double angle strip 2 1/2x1/2" | 2 | |||
52 | Flanged plate 5 1/2x2 1/2" - 4 flanges | 1 | |||
57c | Loaded Hook (large) - barrel type | 1 | |||
59 | Collar | 1 | |||
90a | Curved strip stepped, 2 1/2", 1 3/8r | 4 | |||
111 | Bolt 3/4" | 4 | |||
111a | Bolt 1/2" | 8 | |||
111c | Bolt 3/8" | 13 | |||
111d | Bolt 1 1/8" | 4 | |||
115 | Threaded pin - square shoulder | 2 | |||
120b | Compression spring | 1 | |||
125 | Reverse angle bracket 1/2" | 2 | |||
126 | Trunnion | 2 | |||
126a | Flat trunnion | 2 | |||
140y | 4-hole collar | 2 | |||
142c | Tyre for 1" pulley | 4 | |||
147b | Pivot Bolt with nuts | 1 | |||
155 | Rubber Ring for 1" pulley - black | 2 | |||
176 | Anchoring spring for cord | 1 | |||
186 | Drive band 2 1/2" light | 1 | |||
186a | Drive band 6" light | 1 | |||
186b | Drive band 10" light | 2 | |||
188 | Flexible plate 2 1/2 x 1 1/2" (See note below) | 2 | |||
189 | Flexible plate 5 1/2 x 1 1/2" (See note below) | 2 | |||
190 | Flexible plate 2 1/2 x 2 1/2" (See note below) | 2 | |||
191 | Flexible plate 4 1/2 x 2 1/2" (See note below) | 2 | |||
192 | Flexible plate 5 1/2 x 2 1/2" (See note below) | 2 | |||
193 | Transparent plate 2 1/2 x 1 1/2" | 2 | |||
194 | Plastic plate 2 1/2 x 1 1/2" | 2 | |||
194a | Plastic plate 2 1/2 x 2 1/2" | 2 | |||
199 | Curved plate 2 1/2 x 2 1/2" U section (See note below) | 1 | |||
200 | Curved plate 2 1/2 x 2 1/2" x 1 11/16" radius (See note below) | 1 | |||
212 | Rod and strip connector | 1 | |||
213 | Rod connector/axle tube | 1 | |||
214 | Semicircular plate | 2 | |||
215 | Formed slotted strip | 4 | |||
221 | Triangle flex plate 2 1/2 x 1 1/2" | 4 | |||
501 | Insulating Strip 5 1/2" | 2 | |||
502 | Insulating Strip 2 1/2" | 2 | |||
503 | Insulating Strip 1 1/2" | 2 | |||
507 | Insulating Flat Girder 2 1/2" | 1 | |||
508 | Insulating Flat Girder 1 1/2" | 1 | |||
510 | Insulating plate 5 1/2 x 2 1/2" | 1 | |||
511 | Insulating plate 2 1/2 x 2 1/2" | 1 | |||
513 | Insulating Fishplate | 2 | |||
514 | Insulating bush Wheel, 8 hole | 1 | |||
516 | Insulating bush Wheel, 6 hole | 1 | |||
518 | Bush wheel 1" dia | 1 | |||
520 | Rectangular Coil | 2 | |||
522 | Cylindrical coil | 2 | |||
525 | Core holder for Rect. Coil | 4 | |||
526 | Core for rectangular coil | 2 | |||
527 | Core for cylindrical coil | 2 | |||
528 | Core for cylindrical coil 1" | 2 | |||
529 | 2" Strip (plated) | 2 | |||
530 | Flexible Strip | 2 | |||
531 | Wiper Arm 1" | 2 | |||
532 | Wiper Arm 11/2" | 2 | |||
533 | Wiper Arm 2" | 2 | |||
534 | Slotted Strip 2" | 2 | |||
537 | Permanent Magnet | 2 | |||
538 | Magnet holder | 2 | |||
539 | Lamp holder | 4 | |||
540c | 12v bulb, clear | 1 | |||
540j | 12v bulb, yellow | 1 | |||
540r | 12v bulb, red | 1 | |||
540v | 12v bulb, green | 1 | |||
542 | Terminal nut | 4 | |||
543 | Contact screw | 2 | |||
544 | Contact stud | 8 | |||
545 | Pivot bolt, 1/2" | 2 | |||
548 | Pivot rod 3 1/2" | 1 | |||
549 | Pivot rod2" | 1 | |||
550 | Short pivot rod | 2 | |||
551 | Flat communtator | 1 | |||
554 | Short circuit piece | 2 | |||
555 | Rod w/Square end | 1 | |||
556 | Reel of PVC sleeving | 1 | |||
557 | Reel of bare copper wire | 1 | |||
558 | Coil of connecting wire | 1 | |||
559 | Coil of paper | 1 | |||
560 | Dial card | 1 | |||
561 | Thin washer | 13 | |||
562 | Bell | 1 | |||
563 | Screwed rod, brass 2" | 2 | |||
564 | Insulating spacer | 2 | |||
570 | Bottle/Tube/Ampule of Oil | 1 |
NOTE
The changeover from square to hexagonal nuts is assumed to be 1973. However, this date probably varied a bit between different sets.