Meccano Set Parts Lists
UK MECCANO SET PARTS LIST
Outfit 6 (1913)
Compiled by Timothy Edwards
Outfit 6 (1913) | |||||
---|---|---|---|---|---|
Set P/N | Modern P/N | Part Description | Quantity | ||
1 | Perforated strip 12 1/2" 25 hole | 48 | |||
2 | Perforated strip 5 1/2" | 60 | |||
3 | Perforated strip 3 1/2" 7 hole | 36 | |||
4 | Perforated strip 3" 6 hole | 24 | |||
5 | Perforated strip 2 1/2" 5 hole | 48 | |||
6 | Perforated strip 2" 4 hole | 24 | |||
8 | Angle girder 12 1/2" 25 hole (See note below) | 24 | |||
9 | Angle girder 5 1/2" 11 hole (See note below) | 12 | |||
12 | Angle bracket | 120 | |||
13 | Axle rod 11 1/2" (See note below) | 4 | |||
13a | Axle rod 8" | 1 | |||
14 | Axle rod 6" (See note below) | 4 | |||
15 | Axle rod 5" (See note below) | 4 | |||
15a | Axle rod 4 1/2" | 4 | |||
16 | Axle rod 3 1/2" (See note below) | 4 | |||
17 | Axle rod 2" (See note below) | 5 | |||
19 | 19s/19h | Crank handle - length varied | 4 | ||
20 | Flanged & grooved wheel | 8 | |||
21 | Pulley 1 1/2" with boss | 2 | |||
22 | Pulley 1" with boss | 4 | |||
23 | Pulley 1/2" without boss - metal | 6 | |||
24 | Bush wheel | 5 | |||
25 | Pinion 3/4"d, 1/4"face, 25t | 3 | |||
26 | Pinion 1/2"d, 1/4"face, 20t | 2 | |||
27 | Gear wheel 1 1/4"d, 50t | 2 | |||
28 | Contrate gear 1 1/2"d, 50t | 2 | |||
29 | Contrate gear 3/4"d, 25t | 2 | |||
32 | Worm Wheel 1/2" dia | 1 | |||
33 | Pawl Type 1 (bent metal) | 2 | |||
34 | Spanner - cranked (early ones had hex ends) | 2 | |||
35 | Spring clip | 24 | |||
36 | Screwdriver - flat type | 2 | |||
37 | Nut and bolt (bolt 5/16" long) | 450 | |||
39 | Ball/card of cord | 3 | |||
40 | Hank of cord | 6 | |||
41 | Propeller blade - type 1 - (wide) | 2 | |||
42 | Length of Chain - 12ft | 1 | |||
43 | Tension Spring 2" | 2 | |||
44 | Cranked bent strip | 2 | |||
45 | Double bent strip | 8 | |||
46 | Large Bent Strip (Double Angle Strip 2 1/2" x 1") | 4 | |||
50 | Eye piece (no boss) | R? | |||
51 | 50 | Eye piece (no boss) | 2 | ||
52 | Flanged Plate 5 1/2" x 2 1/2" - 2 flanges | 8 | |||
53 | Flanged plate 3 1/2" x 2 1/2" | 8 | |||
54 | Flanged sector plate 4" | 2 | |||
55 | Rubber bands | 4 | |||
57 | Wire Hook | 2 | |||
58 | Spring cord - 40" | 1 | |||
59 | Collar | 12 | |||
60 | 48a | Bent Strip (Double Angle Strip) 2 1/2" x 1/2" | 16 | ||
61 | Windmill sail | 4 |
NOTES
1. The change from sawcut keyways and grooved rods to tunnel keyways and smooth rods is thought to be about 1906. However it could have been in 1907. During the changeover period some wheels/pulleys/gears etc. had both types of keyway.
2. The date of changeover from key fixing to bosses is taken as per the manuals. In practice it may have been a year earlier.
3. It is thought that normal perforated strips with rounded ends were introduced early-middle of 1908
4. The angle girders & braced girders initially had square ends. This changed to rounded ends in 1918.