'Other' Construction and Allied Systems Info & Downloads
Arts et Métiers(1) Construction Sets
Stabil was sold under the Arts et Métiers name in France.
Info from the Metal Constructional Systems Database
Maker
Walther
Walther
System Type
STABIL type
STABIL type
Country
France
France
Dates
circa 1910 to 1914
circa 1910 to 1914
Material
Steel
Steel
Thread
5/32W
5/32W
Boss Type
not tapped
not tapped
Boss Thread
----
----
Diametrical Pitch of Gears
No. of Parts in System
148
148
Hole Pitch (Spacing) (mm)
12.5
12.5
Diameter of holes in Strips(mm)
4.2 (mean)
4.2 (mean)
Diameter of the Bore in Bosses(mm)
4.1
4.1
Diameter of Axle Rods(mm)
--- (Screwed Rods or Bolts are used as axles.)
--- (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
Size of the Nuts across Flats (mm)
`
`
Bolt diameter (mm)
Comments
STABIL sold under this name in France. Details taken from early 1920's STABIL parts & MCS entry.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are various manuals/leafets which can be downloaded by clicking on the appropriate image.
The Arts and Métiers(1) manual for sets 49, 50 and 51
(Scans from Jean-Pierre)
The Arts and Métiers(1) manual for sets 49, 50, 51 and 52
(Scans from Jean-Pierre)
The Arts and Métiers(1) manual for sets 50 and 51. this manual also has the Stabil name on it.
(Scans from Jean-Pierre)
The Arts and Métiers(1) supplementary manual
(Scans from Jean-Pierre)
© 2010-2019 Timothy Edwards