'Other' Construction and Allied Systems Info & Downloads
Assemblo Construction Sets
Assemblo was an interesting construction toy similar to Meccano's Dinky Builder, only a little larger. It was produced in France from about 1930-1965.
Info from the Metal Constructional Systems Database for ASSEMBLO
Maker
System Type
as DINKY BUILDER
as DINKY BUILDER
Country
France
France
Dates
1930 to circa 1965 (see comment *1)
1930 to circa 1965 (see comment *1)
Material
Steel
Steel
Thread
----
----
Boss Type
not tapped
not tapped
Boss Thread
----
----
Diametrical Pitch of Gears
--
--
No. of Parts in System
58
58
Hole Pitch (Spacing) (mm)
(see comment *2)
(see comment *2)
Diameter of holes in Strips(mm)
---
---
Diameter of the Bore in Bosses(mm)
3.2
3.2
Diameter of Axle Rods(mm)
3.0
3.0
Types of Nuts and Bolts
Nuts: --
Bolts: --
Nuts: --
Bolts: --
Material/Finish of Nuts and Bolts
-- --
-- --
Size of the Nuts across Flats (mm)
---
---
Bolt diameter (mm)
---
---
Comments
1st DINKY BUILDER-type system but more, larger parts. ASSEMBLO cast into Wheel parts; a few parts stamped ASSEMBLO Bte SGDG. *1 Possibly pre/postwar periods. *2 Hole only in centre of 'braced' Plate.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leafets and patents which can be downloaded by clicking on the appropriate image.
© 2010-2019 Timothy Edwards