'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country      System Text Search
(1207 systems found)

Auki Metall-Baukasten
Metall-Baukasten[3]

Auki Metall-Baukasten was a Meccano like construction system with some unusual parts. It was produced in Germany from about 1949 to the 1960s.

Metall-Baukasten[3] is thought to be similar to or the same as Auki. It was made by the same manufacturer.


Auki


Manufacturer / Distributor

August Kirchhoff, Carthausen-Oekinghausen/Westf)


Info from the Metal Constructional Systems Database for AUKI (Ref:AUK)

Maker
August Kirchhoff
System Type
Meccano principle but sig. differences
Country
Germany
Dates
1949 to early 1960s
Material
Aluminium (Alloy) / Steel
Thread
M4
Boss Type
not tapped
Boss Thread
----
Diametrical Pitch of Gears
14 (approximately)
No. of Parts in System
44
Hole Pitch (Spacing) (mm)
12.0
Diameter of holes in Strips(mm)
4.1
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
3.85 (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts: square
Bolts: cheese (slotted)
(see comment *1)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Most parts aluminium but most circular parts Nickel plated steel. Later parts coloured. Lids have 2 boys playing with models on a table. *1 Roundheaded Bolts in some sets.

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for AUKI do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


Below there are manuals/leaflets and photos which can be downloaded by clicking on the appropriate image.


An Auki set manual - unidentified but builds mainly set 2 models (in German and English)
(Added 25/10/2018)

The manual for Auki sets 1 to 3 (in German and English)
(Added 25/10/2018)

Photos of an Auki set 2
(Added 11/03/2021)

Photos of an Auki set 3
(Added 11/03/2021)

Various photos of the Auki construction system
(Added 25/10/2018)


Metall-Baukasten[3]


Manufacturer / Distributor

August Kirchhoff, Carthausen-Oekinghausen/Westf)


Info from the Metal Constructional Systems Database for METALL-BAUKASTEN [3] (Ref:MBN3)

Maker
August Kirchhoff
System Type
STABIL type
Country
Germany
Dates
after World War Two
Material
Metal
Thread
 
Boss Type
not tapped (probably)
Boss Thread
----
Diametrical Pitch of Gears
 
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
12.5 (see comment *1)
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
(Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Similar to, or probably the same as AUKI, but perhaps fewer sets. Lid label has 2 boys with Lorry & to the right an 8-bladed Windmill. Sets seen have an AUKI manual. *1 Scaled, could be ½".

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for METALL-BAUKASTEN [3] do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. of Metall-Baukasten[3] available for downloading. If you can supply any, please get in contact with me.