'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country       (810 systems found)

Construction Jeep(1)
Construction Jeep(2)
Construction Truck(1)
Construction Truck Trailer

These Construction Jeeps and Trucks/Trailers are all very similar and were probably all made by the same and/or successor companies. They were made in Japan. Dates uncertain but possibly from the 1960s to the 1970s, but could be earlier and/or later.

Construction Jeep(1)


Manufacturer / Distributor

Marusan Shoten Ltd., Tokyo, Japan


Info from the Metal Constructional Systems Database for CONSTRUCTION JEEP [1]

Maker
 
System Type
Hole pitch <12.7mm
Country
Japan
Dates
after 1945
Material
Steel
Thread
3x.6 (some significant doubt)
Boss Type
push fit (see comment *1)
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
17
Hole Pitch (Spacing) (mm)
10.0 (multiples of value shown, including half.)
Diameter of holes in Strips(mm)
3.2
Diameter of the Bore in Bosses(mm)
3.4 (see comment *2)
Diameter of Axle Rods(mm)
3.0
Types of Nuts and Bolts
Nuts: square
Bolts: round (slotted)
(see comment *3)
Material/Finish of Nuts and Bolts
Steel with a Brass finish
Size of the Nuts across Flats (mm)
6.0
Bolt diameter (mm)
5.2

Comments
Lid has blue Jeep towing a simple Mobile Crane. Set has toy Jeep with constructional parts to make add-ons. Thread, & N&B data, need checking. *1 Push fit rubber Road Wheels. *2 Eyeletted Pulleys. *3 Hex shown in MCS.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.


Construction Jeep(2)


Manufacturer / Distributor

Daiya, Japan


Info from the Metal Constructional Systems Database for CONSTRUCTION JEEP [2]

Maker
 
System Type
Hole pitch <12.7mm
Country
Japan
Dates
known in 1967
Material
Steel
Thread
 
Boss Type
push fit (see comment *1)
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
17
Hole Pitch (Spacing) (mm)
10.0 (multiples of value shown, including half.)
Diameter of holes in Strips(mm)
3.3 (see comment *2)
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
2.8
Types of Nuts and Bolts
Nuts: square
Bolts: round (slotted)
Material/Finish of Nuts and Bolts
   with a Nickel plated finish
Size of the Nuts across Flats (mm)
6.0
Bolt diameter (mm)
 

Comments
Lid has green Jeep towing a simple Trailer. Set has Jeep & parts similar to CONSTRUCTION JEEP [1] but Flanged Plate has square corners & is red not blue. Differemt maker, as CONSTRUCTION TRUCK [1]. *1 Push fit rubber Wheels. *2 Mean; 3.1 also reported.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.


Construction Truck(1)


Manufacturer / Distributor

Daiya, Japan


Info from the Metal Constructional Systems Database for CONSTRUCTION TRUCK [1]

Maker
 
System Type
Hole pitch <12.7mm
Country
Japan
Dates
 
Material
Steel
Thread
 
Boss Type
 
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
---
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Lid has Truck model with ladder on it. Set similar in style to CONSTRUCTION TRUCK TRAILER but different toy Lorry (called New Chevrolet Truck on model leaflet cover) & some different parts.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.


Construction Truck Trailer


Manufacturer / Distributor

Unknown, Japan - but could be - Daiya, Japan


Info from the Metal Constructional Systems Database for CONSTRUCTION TRUCK TRAILER

Maker
 
System Type
Hole pitch <12.7mm
Country
Japan
Dates
after World War Two
Material
Steel
Thread
 
Boss Type
push fit
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
14
Hole Pitch (Spacing) (mm)
10.0 (multiples of value shown, including half.)
Diameter of holes in Strips(mm)
3.1
Diameter of the Bore in Bosses(mm)
---
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: round (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
6
Bolt diameter (mm)
5

Comments
Similar in style to CONSTRUCTION JEEP but toy flatbed Lorry & some different parts. Model leaflet has name Construction Truck on its cover.

Below there are manuals/leaflets which can be downloaded by clicking on the appropriate image.


Photos of an AHI Construction Truck Trailer set
(Added 18/07/2021)