'Other' Constructional and Allied Systems Info & Downloads
Deltax (Japan)
Build-X (Canada)
Delta-X(a) (USA)
Delta-X(b) (Japan)
Steel Construction Kits
Deltax was a Meccano-like construction system. It was made in Japan in the 1970s to 1980s. It was also exported to Canada where it was marketed as Build-X and to the USA where it was known as Delta-X.
In 1989 'Steel Construction Kits' - a virtually identical system (with the same part numbers), was imported into Canada from Korea. Was production of this system moved to Korea from Japan in the late 1980s or was it made there under license?
In around 2005 a new version (Delta-X(b)) was produced, but with smaller parts and M3 screws. This was produced till at least 2009.
Deltax (Japan)
Manufacturer / Distributor
Epoch Co. Ltd., 1-12-3, Komagate, m daito-ku, Tokyo, Japan
Info from the Metal Constructional Systems Database for DELTAX (Ref:D-N)
Epoch Co.
Hole pitch >12.7mm
Japan
1970s to 1980s
Steel / Plastic
M4
double-tapped
M4
25 (see comment *1)
58
14.0
4.3
4.3
4.2
Nuts: hexagonal
Bolts: dome (crosshead)
(see comment *2)
Steel with a Iridescent finish
6.9
6.9
Comments
Name In Japanese characters. Lids also show a model, &, usually, set nos. 'D-40 to D-500'. Axles have flat to suit some of the bosses. Plastic Plates marked MADE IN JAPAN. *1 25.4=Mod.1. *2 Slotted Bolt head shown.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for DELTAX do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. of Deltax available for downloading. If you can supply any, please get in contact with me.
Build-X (Canada)
Manufacturer / Distributor
Imported by Leisure Dynamics of Canada Ltd., 1315 Laswrence Avenue East, Don Mills, Ontario, M3A 1C6, Canada.
Sold under the Sears name
Made by Epoch Co. Ltd., Tokyo, Japan
Info from the Metal Constructional Systems Database for BUILD-X (Ref:B-X)
Epoch Co.
Meccano principle but sig. differences
Canada
circa 1970 to circa 1978
Steel / Plastic
M4
double-tapped
M4
25 (see comment *1)
49
14.0
4.3
4.3
4.22
Nuts: hexagonal
Bolts: dome (crosshead)
Steel with a Iridescent finish
6.9
6.9
Comments
Parts & Sets as DELTA-X. Sold under Sears name. Axles have flat to suit some of the bosses. *1 25.4 = Mod.1.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for BUILD-X do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. of Deltax available for downloading. If you can supply any, please get in contact with me.
Manufacturer / Distributor
Epoch Playthings, USA
(imported from Epoch Co. Ltd., Japan)
Info from the Metal Constructional Systems Database for DELTA-X [a] (Ref:D-Xa)
Epoch Co.
Hole pitch >12.7mm
USA (see comment *1)
1970s
Steel / Plastic
M4
double-tapped
M4
25 (see comment *2)
58 (see comment *3)
14.0
4.3
4.3
4.2
Nuts: hexagonal
Bolts: pan (slotted)
Steel with a Iridescent finish
6.9
6.9
Comments
Model &/or parts on lids. Axles have flat to suit some of the bosses. *1 Made in Japan, parts as DELTAX. *2 25.4 = Mod.1. *3 Excluding the parts in the Galaxy space sets.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for DELTA-X [a] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leafets which can be downloaded by clicking on the appropriate image.
Steel Construction Kits (Korea)
Manufacturer / Distributor
Made in Korea and sets sold in Canada
Info from the Metal Constructional Systems Database for STEEL CONSTRUCTION KITS (Ref:SCK)
Hole pitch >12.7mm
Korea
known in 1989
Steel / Plastic
M4
push fit
----
42 (see comment *1)
14.0
4.2 (see comment *2)
---
4.0 (see comment *3)
Nuts: hexagonal
Bolts: dome (crosshead)
Steel with a Iridescent finish
6.9
6.9
Comments
7 Kits known. Sold in Canada for 1 year. Most parts very like DELTAX & part no's the same. *1 At least. *2 A few 4.7 for hexagonal section Axles. *3 Across flats.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
NOTE - The 'Other Systems Newsletter' pages displayed further up this web page, may also include information on this system/era.
There are currently no manuals, leaflets or photos etc. of Steel Construction Kits available for downloading. If you can supply any, please get in contact with me.
Delta-X(b) (Japan)
Manufacturer / Distributor
Made in Korea and sets sold in Canada
Info from the Metal Constructional Systems Database for DELTA-X [b] (Ref:D-Xb)
Epoch Co.
Hole pitch <12.7mm
Japan
2005 (see comment *1) to in production in 2009 and continuing
Steel / Plastic
M3
no boss
----
--
70 (see comment *2)
8.0
3.0
Nuts: hexagonal
Bolts: button (crosshead)
Steel with a Nickel plated finish
5.4
5.1(see comment *3)
Comments
New version of DELTAX with smaller parts. *1 aluminium © date but perhaps before 2000. *2 at least & plus plastic parts in alternative colours. *3 5.2 for longer ones.
Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here
NOTE : If the 'Other Systems Newsletter' pages for DELTA-X [b] do not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.