'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country       (805 systems found)

Der Kleine Elektro-Ingenieur Construction Sets
and
Elektro Construction Sets

Der Kleine Elektro-Ingenieur and Elektro were both constructional systems for making experimental electrical and science models. As they both contain many of the same parts they are being dealt with together. They were both made in East Germany in the 1950s. Elektro was probably earlier.

Elektro


Manufacturer / Distributor

E.G.B. (Elektro-Gerate-Bau) Ltd., Leipzig, East Germany


Info from the Metal Constructional Systems Database for ELEKTRO

Maker
 
System Type
Electrical/science
Country
Former East Germany
Dates
1950s (some significant doubt)
Material
Aluminium (Alloy) / Plastic
Thread
M3
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
52
Hole Pitch (Spacing) (mm)
10.0
Diameter of holes in Strips(mm)
4.2 (see comment *1)
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
---
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: tapered cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Nickel plated finish
Size of the Nuts across Flats (mm)
5.6
Bolt diameter (mm)
5.0

Comments
Made by Early/Earlier.G.B. Many parts like DER KLEINE ELEKTRO-INGENIEUR. MCS says Mag,Electro-Mag,Chem,Static Elec sets. Parts including Motor Armature, 8x14 Flanged Platel with no holes in flanges. *1 Probably smaller in Flanged Plate.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.


Der Kleine Elektro-Ingenieur


Manufacturer / Distributor

Deutche Post, Fernmeldeamt, Leipzig, East Germany


Info from the Metal Constructional Systems Database for DER KLEINE ELEKTRO-INGENIEUR

Maker
 
System Type
Electrical/science
Country
Former East Germany
Dates
circa 1959
Material
Aluminium (Alloy) / Plastic
Thread
 
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
52
Hole Pitch (Spacing) (mm)
10.0
Diameter of holes in Strips(mm)
4.0
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
---
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: tapered cheese (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Made by Deutsche Post. Probably followed ELEKTRO, many parts shown as identical. Also same or similar to the probably later PIKO.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.