'Other' Constructional and Allied Systems Info & Downloads

Disco Ludendo Construction Sets

Disco Ludendo was a Meccano-like construction system. It was made in Italy. The appear to be two eras to the system. Initially (as shown in the first manual below) the system has Condor style parts, but with AMI models (models appear to be from the same printers plate as in AMI manuals). Later on (as shown in the second manual below) the manual models changes to those on the Condor system. The later Disco Ludendo manuals look to be either identical or very similar to the early Condor manuals. At some point Disco Ludendo sets changed name to became Condor sets. Disco Ludendo sets go from 00 to 4 instead of CONDOR's 1 to 7, although there is a direct correlation between the two ranges.

Some photos of a set that was bought on Ebay, in its original wooden box but without an instruction book are shown below. This set is identical to the oldest version of CONDOR, so confirms the suspicion (above) that it predates Condor. As a curiosity, the flexible plates are red on one side and green on the other. Note that this system together with the oldest version of CONDOR is characterized by incorporating (as AMI / LAC and BRAL do in their high numbers) circular flanged plates of 65 mm. diameter (copied from MÄRKLIN) with their corresponding toothed couplings (part No.28)

Below there are manuals/leafets which can be downloaded by clicking on the appropriate image.

Disco Ludendo (1)

(Manual models are same as the AMI system)


Info from the Metal Constructional Systems Database for DISCO LUDENDO [1]

Maker
 
System Type
MECCANO & MÄRKLIN features
Country
Italy
Dates
1940s (some significant doubt)
Material
Steel
Thread
 
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
 
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Lid label & manual cover have small boy & girl below Cable Railway. Parts not seen but manual models as AMI.

A Disco Ludendo manual for set 2.

Disco Ludendo (3)

(Manual models are same as the CONDOR system)


Info from the Metal Constructional Systems Database for DISCO LUDENDO [3]

Maker
 
System Type
Very like Meccano
Country
Italy
Dates
known in 1985 (some significant doubt)
Material
Steel
Thread
 
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
 
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Only manual known. Cover as DISCO LUDENDO(2) but no DISCO LUDENDO/logo, & CONSTRUZIONI MECCANICHE/Condor logo at top. DISCO LUDENDO on title page. Models as CONDOR, & Illustrated/illustration.Pts (more than DISCO LUDENDO(2)).

A later Disco Ludendo manual for sets 3-4.

Some photos of a Disco Ludendo set. Note that the flexible plates are red on one side and green on the other. This set is virtually identical to the early Condor sets.
(Added 13/06/2020)