'Other' Constructional and Allied Systems Info & Downloads
Forgeacier Construction Sets
Forgeacier was a DIY construction system where you cut parts out of metal yourself. It was produced in France from around 1931 to 1950.
Info from the Metal Constructional Systems Database for FORGEACIER
Maker
Jouets de Paris
Jouets de Paris
System Type
DIY type
DIY type
Country
France
France
Dates
1931 to mid 1950 (see comment *1)
1931 to mid 1950 (see comment *1)
Material
Steel
Steel
Thread
M3.5; M3 (see comment *2)
M3.5; M3 (see comment *2)
Boss Type
single-tapped
single-tapped
Boss Thread
M3.5
M3.5
Diametrical Pitch of Gears
39 (see comment *3)
39 (see comment *3)
No. of Parts in System
41
41
Hole Pitch (Spacing) (mm)
10.0 (hole pitch, only for holes in wheels or discs.)
10.0 (hole pitch, only for holes in wheels or discs.)
Diameter of holes in Strips(mm)
3.6 (see comment *4)
3.6 (see comment *4)
Diameter of the Bore in Bosses(mm)
3.6
3.6
Diameter of Axle Rods(mm)
3.5
3.5
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
Brass with a Brass finish
(see comment *5)
Brass with a Brass finish
(see comment *5)
Size of the Nuts across Flats (mm)
6.0(see comment *6)
6.0(see comment *6)
Bolt diameter (mm)
Comments
NGN similar, except 3" Pulley. FORGEACIER FRANCE JEP on Gears etc. *1In '54 catalogue, not in '59, nor in JP catalogue after '51. *2mushroom 3.5 for M115; N&B probably M3. *3Mod .65. *4In parts; punch not seen. *5*6Nut for M115.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leafets and photos which can be downloaded by clicking on the appropriate image.
© 2010-2021 Timothy Edwards