'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country       (805 systems found)

Goliath Construction Sets
and
Invicta Construction Sets

Goliath and Invicta construction sets appear to be very similar if not identical, although MCS does give different holes sizes. They both use the same Trix-like parts but with fewer holes. Many of the models are the same using the same artwork. They were made in the Spain in around the mid 1930s.


Goliath


Manufacturer / Distributor

An unknown company from Spain


Info from the Metal Constructional Systems Database for GOLIATH

Maker
 
System Type
as TRIX (inc MCX)
Country
Spain
Dates
1930s
Material
 
Thread
 
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
14 (approximately)
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
2.4
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
--- (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: round (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Less holes than TRIX to give V pattern. Appears same as INVICTA but MCS gives different hole sizes.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available of Goliath for downloading. If you can supply any, please get in contact with me.


Invicta


Manufacturer / Distributor

An unknown company from Spain


Info from the Metal Constructional Systems Database for INVICTA

Maker
 
System Type
as TRIX (inc MCX)
Country
Spain
Dates
1933 to known in early 1940s
Material
Steel
Thread
3.5x.8
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
14
Hole Pitch (Spacing) (mm)
7.8 (see comment *1)
Diameter of holes in Strips(mm)
3.7
Diameter of the Bore in Bosses(mm)
---
Diameter of Axle Rods(mm)
--- (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: tapered cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Brass finish
Size of the Nuts across Flats (mm)
6.4
Bolt diameter (mm)
5.1

Comments
cf GOLIATH. V-pattern holes in Strips. Box lid has curly haired child with Aeroplane. *1 10.5 in Wheel Discs.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. of Invicta available for downloading. If you can supply any, please get in contact with me.