'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country      System Text Search
(1207 systems found)

Kliptiko
Snapsticks

Kliptiko metal construction sets, made models out of hollow tubes using special clips to join them together. It was made in England from the early 1910s till the Second World War.

A Snapsticks set has been seen which looks as though it was made up of Kliptiko parts. It was seen in an advert in early 1948.


Kliptiko


Manufacturer / Distributor

William Bailey Ltd, Victoria Works, Weaman Street, Birmingham, UK


Info from the Metal Constructional Systems Database for KLIPTIKO (Ref:KLO)

Maker
 
System Type
Mainly Rods/Tubes
Country
United Kingdom
Dates
1913 to known in 1939
Material
Steel
Thread
1/8W
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
20
Hole Pitch (Spacing) (mm)
---
Diameter of holes in Strips(mm)
---
Diameter of the Bore in Bosses(mm)
10.1
Diameter of Axle Rods(mm)
9.5 (approximately)
Types of Nuts and Bolts
Nuts: square
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Brass finish
(see comment *1)
Size of the Nuts across Flats (mm)
5.6
Bolt diameter (mm)
6.4

Comments
Tubes of about 3/8" diameter, also used as Axles, joined by similar tubes with springy forked ends. See also SNAPSTICKS. *1 Bolt plain steel.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for KLIPTIKO do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


Below there are manuals/instructions which can be downloaded by clicking on the appropriate image.


An instruction manual for Kliptiko.
(Scans from Urs Flammer)

Another instruction manual for Kliptiko.

The USA patent for Kliptiko.
(Scans from Urs Flammer)

Various photos of the Kliptiko construction system.
(Photos from Urs Flammer)


Snapsticks


Manufacturer / Distributor

Champion Products Ltd., 190 Ashted Row, Birmingham, UK


Info from the Metal Constructional Systems Database for SNAPSTICKS (Ref:SNP)

Maker
 
System Type
Mainly Rods/Tubes
Country
United Kingdom
Dates
known in 1948
Material
Steel
Thread
 
Boss Type
no boss
Boss Thread
 
Diametrical Pitch of Gears
--
No. of Parts in System
6
Hole Pitch (Spacing) (mm)
---
Diameter of holes in Strips(mm)
---
Diameter of the Bore in Bosses(mm)
10.1
Diameter of Axle Rods(mm)
9.5 (approximately)
Types of Nuts and Bolts
Nuts: --
Bolts: --
Material/Finish of Nuts and Bolts
--  --
Size of the Nuts across Flats (mm)
---
Bolt diameter (mm)
---

Comments
A small set was advertised, probably with KLIPTIKO parts. Relevant data from KLIPTIKO.

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for SNAPSTICKS do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. of Snapsticks available for downloading. If you can supply any, please get in contact with me.