'Other' Constructional and Allied Systems Info & Downloads

Konstruktor(6)

Konstruktor(6) was almost a clone of 1960s Meccano, except that the hole spacing was 12.1mm. The parts numbering was different to Meccano. It was made in Russia by the Chelyabinsk Plant "Pribor" (Челябинский завод "Прибор") during at least the 1980s.

Info from the Metal Constructional Systems Database for KONSTRUKTOR [6]

Maker
 
System Type
Hole pitch <12.7mm
Country
Russia
Dates
early 1980s
Material
Metal
Thread
M4
Boss Type
 
Boss Thread
M4
Diametrical Pitch of Gears
--
No. of Parts in System
39
Hole Pitch (Spacing) (mm)
12.0
Diameter of holes in Strips(mm)
4.4
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
` 
Bolt diameter (mm)
 

Comments
MECCANO-like parts & models.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided

Info from the Metal Constructional Systems Database for KONSTRUKTOR [4A]

Maker
 
System Type
STABIL type
Country
Russia
Dates
 
Material
Steel
Thread
 
Boss Type
no boss
Boss Thread
----
Diametrical Pitch of Gears
--
No. of Parts in System
25 (approximately)
Hole Pitch (Spacing) (mm)
12.5 (probably)
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
--- (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
` 
Bolt diameter (mm)
 

Comments
Set similar to KONSTRUKTOR [4] but coloured parts, & thus it may be earlier. The Windmill model shown on Ebay is identical to one for KONSTRUKTOR [4] but crudely drawn.

Below there are manuals/leafets which can be downloaded by clicking on the appropriate image.


A Konstruktor(6) manual for set 1 - date unknown

Photos of a Konstruktor(6) set 1.

A Konstruktor(6) manual for a set 1 made in the 1980s.

Photos of a Konstruktor(6) set 1 made in 1980s.

A Konstruktor(6) manual for a set 1 made in the 1987.

A Konstruktor(6) manual for a set 3 made in 1988.

Photos of a Konstruktor(6) set 3 made in 1988.

Page content last updated - 20th October 2019