'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country       (812 systems found)

Mekanik(2) Construction Sets
and
Mecanic(4) Construction Sets

Mekanik(2) / Mecanic(4) was a Meccano-like Construction system which had both Meccano and Märklin features. For most of the time the system was called Mekanik, although for a period in (probably) the late 1950s it was called Mecanic. It was made in Sweden from 1948 to 1962.


Manufacturer / Distributor

Hedbergs Verkstader, Osby, Avd.Teve., Sweden


Info from the Metal Constructional Systems Database for MEKANIK [2]

Maker
 
System Type
MECCANO & MÄRKLIN features
Country
Sweden
Dates
1948 to 1962
Material
Steel
Thread
5/32W
Boss Type
double-tapped
Boss Thread
 
Diametrical Pitch of Gears
37
No. of Parts in System
143
Hole Pitch (Spacing) (mm)
13.0
Diameter of holes in Strips(mm)
4.3
Diameter of the Bore in Bosses(mm)
4.1
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Many unusual parts including: single Braced Girders with 1 row of holes; Pulley Discs with & without boss, up to 100mm; Flanged Plates 5x5,7x9,7x11h; Perforated Plate 7x13h. Data need verifying. See also MECANIC [4].

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided



Manufacturer / Distributor

Hedbergs Verkstader, Osby, Avd.Teve., Sweden


Info from the Metal Constructional Systems Database for MECANIC [4]

Maker
 
System Type
MECCANO & MÄRKLIN features
Country
Sweden
Dates
1950 (see comment *1)
Material
Steel
Thread
5/32W
Boss Type
double-tapped
Boss Thread
 
Diametrical Pitch of Gears
37
No. of Parts in System
143
Hole Pitch (Spacing) (mm)
13.0
Diameter of holes in Strips(mm)
4.3
Diameter of the Bore in Bosses(mm)
4.1
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
As MEKANIK [2], & *1 name used for brief period in, probably, 2nd half of 1950s.. Data from MEKANIK [2].

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.