Metallbaukasten(10)

Select System Type Select Country (804 systems found)

Metallbaukasten(10) Construction Sets

Metallbaukasten(10) was a simple Meccano-like constructional system. It was made in Germany in the late 1940s

There are two different sets, however they appear to both be made by the same manufacturer. For convenience one is classified as Metallbaukasten(10a) and the other as Metallbaukasten(10b)

Metallbaukasten(10a)

Manufacturer / Distributor

An unknown company from Germany

Info from the Metal Constructional Systems Database for METALL-BAUKASTEN [10a]

Maker

System Type
Hole pitch <12.7mm

Country
Germany

Dates
1947 (see comment *¹)

Material
Steel

Thread

Boss Type
no boss

Boss Thread
----

Diametrical Pitch of Gears
--

No. of Parts in System
12

Hole Pitch (Spacing) (mm)
10 (probably)

Diameter of holes in Strips(mm)

Diameter of the Bore in Bosses(mm)

Diameter of Axle Rods(mm)
-- (Screwed Rods or Bolts are used as axles.)

Types of Nuts and Bolts
Nuts: hexagonal
Bolts: round (slotted)

Material/Finish of Nuts and Bolts
Steel

Size of the Nuts across Flats (mm)
`

Bolt diameter (mm)

Comments
The one set seen is in a wooden box with a yellow sliding lid showing a boy with 5 small models. Parts may have been nickelled. 3,5,8 holes Strips; Angle Bracket; Pulley Disc. Model Leaflet is headed Metallbaukasten Nr.136. *¹ From Print Ref.

I currently don't have any photos of this set.

Metallbaukasten(10b)

According to the instruction leaflet this set dates from 1946. The leaflet was printed in Redensburg Schleswich Holstein which is on the border with Denmark.

Brief Details - The distance between holes is 10mm, the diameter of holes is 3.30mm, and the thread of nuts, bolts, and axles is M3.

Manufacturer / Distributor

An unknown company from Germany

Photos of a Metallbaukasten(10b) set.
(Added 3/11/2020)