'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country      System Text Search
(1207 systems found)

Olympia
E.W.G.

Olympia was a Meccano-like construction system with tiny nickelled parts. It was produced in East Germany from around 1949 to 1955

E.W.G. is almost certainly the same same as Olympia, also from East Germany.


Olympia


Manufacturer / Distributor

Elektrobau Werner Genrencher, Lobau/Sechsen, East Germany


Info from the Metal Constructional Systems Database for OLYMPIA (Ref:OLY)

Maker
 
System Type
Hole pitch <12.7mm
Country
Former East Germany
Dates
1949 to 1955
Material
Steel
Thread
M2
Boss Type
double-tapped
Boss Thread
M2
Diametrical Pitch of Gears
--
No. of Parts in System
36
Hole Pitch (Spacing) (mm)
7.0
Diameter of holes in Strips(mm)
2.2
Diameter of the Bore in Bosses(mm)
2.1
Diameter of Axle Rods(mm)
2.0
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Steel finish
(see comment *1)
Size of the Nuts across Flats (mm)
5.5
Bolt diameter (mm)
3.8

Comments
Tiny nickeled parts with aluminium Wheels. *1 Nuts aluminium.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for OLYMPIA do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


Below there are manuals/leaflets and photos which can be downloaded by clicking on the appropriate image.


A manual for Olympia set 1
(Added 14/11/2018)

The set contents for Olympia set 2
(Added 14/11/2018)

A manual for Olympia sets 0 to 3
(Added 14/11/2018)

Photos of an Olympia set 3
(Added 11/03/2021)

Various photos of the Olympia construction system
(Added 14/11/2018)


E.W.G.


Manufacturer / Distributor

Elektrobau Werner Genrencher, Lobau/Sechsen, East Germany


Info from the Metal Constructional Systems Database for E.W.G. (Ref:EWG)

Maker
 
System Type
Hole pitch <12.7mm
Country
Former East Germany
Dates
 
Material
 
Thread
 
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
 
No. of Parts in System
 
Hole Pitch (Spacing) (mm)
 
Diameter of holes in Strips(mm)
 
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
 
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Almost certainly OLYMPIA under another name.

Pages from the 'Other Systems Newsletter' which contain information on this system are shown below. They can also be downloaded to your computer if desired here

NOTE : If the 'Other Systems Newsletter' pages for E.W.G. do not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.