'Other' Construction and Allied Systems Info & Downloads
Primus Engineering Construction Sets
Primus Engineering construction sets were made from both weed and metal. They were made in England from 1913-1926
Info from the Metal Constructional Systems Database for PRIMUS ENGINEERING
1913 (see comment *1) to circa 1926
Steel / Wood
1/8W (see comment *2)
97 (see comment *3)
4.1 (see comment *4)
Bolts: cheese (slotted)
Steel with a Copper finish
5.9(see comment *5)
*1 Or 14e. *2 Most, or 5BA? Some smaller. Later 5/32W. *3 Including Big Wheel parts. *4 Typical but up to 4.3. *5 For Bolts with slotted cheesehead look, but many others. Big Wheel N&B: 4x32 square nut and slotted mushroom head bolt plain brass 6.4 7.6-7.9.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/instructions which can be downloaded by clicking on the appropriate image.
One of the first mention of the Primus Engineering system. It was in 'The Model Engineer and Electrician' magazine dated December 18, 1913
This 1916 Primus Engineering instruction manual is actually the 1915 edition with a stick-in label showing the 1916 prices.
This 1917 Primus Engineering instruction manual is actually the second 1914 edition with a stick-in label showing the 1917 prices.
This reuse of an old manual would be a wartime measure.
This is the 1917 Primus Engineering instruction manual with a "Prices Advanced" stamp on pages 3 and 7 to indicate it was issued in 1918.
Unfortunately it is without its front cover.
The 1917 trade brochure for Primus Engineering, showing their full range of products.
Unfortunately the original was in a very bad state.
© 2010-2020 Timothy Edwards