'Other' Constructional and Allied Systems Info & Downloads

Select System Type      Select Country       (812 systems found)

Pygmée

Pygmée was a construction system using mainly braced girder type parts. It was made in France in the 1920s.


Manufacturer / Distributor

Etablissements Pericaud, 85 Boulevard Voitaire, Paris, France


Info from the Metal Constructional Systems Database for PYGMÉE

Maker
 
System Type
Non-Meccano type
Country
France
Dates
known in 1920 to 1920s
Material
Steel
Thread
3x.6 (some significant doubt)
Boss Type
 
Boss Thread
 
Diametrical Pitch of Gears
 
No. of Parts in System
28
Hole Pitch (Spacing) (mm)
8.0 (see comment *1)
Diameter of holes in Strips(mm)
3.4 (see comment *2)
Diameter of the Bore in Bosses(mm)
 
Diameter of Axle Rods(mm)
 
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: hexagonal (slotted)
(some significant doubt)
Material/Finish of Nuts and Bolts
Brass with a Brass finish
(see comment *3)
Size of the Nuts across Flats (mm)
Bolt diameter (mm)
 

Comments
Different lengths of Braced Girders joined with 3 holes long Angle Girders. Also an octagonal Plate, Wheels, some spoked, & Gears. *1 28.5 along Braced Girders. *2 3.3-3.5 in different & in the same parts. *3 Bolt steel.

The MCS document for this system is shown below. It can also be downloaded to your computer if desired here

NOTE : If the MCS document does not appear in the window below, then refresh the page.

The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided


There are currently no manuals, leaflets or photos etc. available for downloading. If you can supply any, please get in contact with me.