'Other' Constructional and Allied Systems Info & Downloads
Sako / Sakolo Construction Sets
Sako / Sakolo was a simple Meccano-like construction system. It was made in Germany - probably in the 1950s.
Manufacturer / Distributor
An unknown company from Germany
Info from the Metal Constructional Systems Database for SAKO
Maker
System Type
Hole pitch <12.7mm
Hole pitch <12.7mm
Country
Germany
Germany
Dates
1950s (some significant doubt)
1950s (some significant doubt)
Material
Steel / See comment *1
Steel / See comment *1
Thread
M4
M4
Boss Type
single-tapped (see comment *2)
single-tapped (see comment *2)
Boss Thread
M4
M4
Diametrical Pitch of Gears
--
--
No. of Parts in System
21
21
Hole Pitch (Spacing) (mm)
10.0
10.0
Diameter of holes in Strips(mm)
4.1
4.1
Diameter of the Bore in Bosses(mm)
4.1
4.1
Diameter of Axle Rods(mm)
4.0 (see comment *3)
4.0 (see comment *3)
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: cheese (slotted)
Nuts: hexagonal
Bolts: cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Dull plated finish
Steel with a Dull plated finish
Size of the Nuts across Flats (mm)
6.9
6.9
Bolt diameter (mm)
6.9
6.9
Comments
Dull plated parts including 39mm Disc with 'sq' pattern holes. White lid with red name & 2 blue models: Big Wheel & Crane, compare with SAKOLO. *1But clearance hole right through. Another set has dull black parts with *2aluminium Pulleys, & *33.8 Axles.
Manufacturer / Distributor
An unknown company from Germany
Info from the Metal Constructional Systems Database for SAKOLO
Maker
System Type
Hole pitch <12.7mm(probably)
Hole pitch <12.7mm(probably)
Country
Germany
Germany
Dates
Material
Steel (probably)
Steel (probably)
Thread
Boss Type
Boss Thread
Diametrical Pitch of Gears
No. of Parts in System
Hole Pitch (Spacing) (mm)
10.0 (some significant doubt)
10.0 (some significant doubt)
Diameter of holes in Strips(mm)
Diameter of the Bore in Bosses(mm)
Diameter of Axle Rods(mm)
Types of Nuts and Bolts
Nuts:
Bolts:
Nuts:
Bolts:
Material/Finish of Nuts and Bolts
Size of the Nuts across Flats (mm)
`
`
Bolt diameter (mm)
Comments
Lid design as SAKO but larger models, a Grabbing Crane & Lorry. Black parts like MÄRKLIN. Photo of an Accessory se has Angle Girders, Tyres, & a bright 9(ish) hole diameter Annulus with rings of 6 & 12 holes..
Below there are manuals/leaflets and photos which can be downloaded by clicking on the appropriate image.