'Other' Constructional and Allied Systems Info & Downloads
Staba(1) Construction Sets
Staba(1) was a Meccano-like construction system. It was made in East Germany from 1948 to around 1966
Manufacturer / Distributor
Initially: Gebr Ehrlich, Erfurt, East Germany
From 1949: H.H. Ehrlicher, East Germany
From 1953/4: Otto Horseljau, Erfurt, East Germany
From 1955: Karl Teuteburg KG, 59 Essenoch, East Germany
Info from the Metal Constructional Systems Database for STABA [1]
Maker
System Type
Hole pitch <12.7mm
Hole pitch <12.7mm
Country
Former East Germany
Former East Germany
Dates
1948 to known in 1966
1948 to known in 1966
Material
Steel
Steel
Thread
M3
M3
Boss Type
single-tapped
single-tapped
Boss Thread
M3
M3
Diametrical Pitch of Gears
34 (see comment *1)
34 (see comment *1)
No. of Parts in System
60 (see comment *2)
60 (see comment *2)
Hole Pitch (Spacing) (mm)
12.0
12.0
Diameter of holes in Strips(mm)
3.1
3.1
Diameter of the Bore in Bosses(mm)
3.1
3.1
Diameter of Axle Rods(mm)
3.0 (mean) (Screwed Rods or Bolts are used as axles.)
3.0 (mean) (Screwed Rods or Bolts are used as axles.)
Types of Nuts and Bolts
Nuts: hexagonal
Bolts: tapered cheese (slotted)
Nuts: hexagonal
Bolts: tapered cheese (slotted)
Material/Finish of Nuts and Bolts
Steel with a Nickel plated finish
(see comment *3)
Steel with a Nickel plated finish
(see comment *3)
Size of the Nuts across Flats (mm)
5.5
5.5
Bolt diameter (mm)
5.4
5.4
Comments
3-20h Strips, often used curved; Gears with & without boss, & Worm (wire in manual but solid in late sets). Maker: Ehrlich; Horseljau; Teuteberg. *1 Mod.75. *2 approx, +20 for Telefon sets. *3 Late may be bright zinc plated steel.
The MCS document for this system is shown below. It can also be downloaded to your computer if desired here
NOTE : If the MCS document does not appear in the window below, then refresh the page.
The report can be zoomed into, made full screen or downloaded as a pdf document by using the controls provided
Below there are manuals/leaflets and photos which can be downloaded by clicking on the appropriate image.
© 2010-2021 Timothy Edwards