'Other' Constructional and Allied Systems Info & Downloads
Stabo
Stabo was a construction system which used aluminium tubes connected by plastic couplings. It was made in East Germany, in the early 1960s. There were four main sets - 10, 20, 30 and 40, set 15 containing card infill panels, together with 14 individual parts boxes (1 to 9, 1 to 14 and 16) Below you can see a purchase invoice for some Staba sets to a Montreal shop dated January 1964.
Manufacturer / Distributor
GETA, Hans Kolbe u. Co, Hildesheim, Kalenberger Graben 33
Info from the Metal Constructional Systems Database for STABO
Maker
System Type
Mainly Rods/Tubes
Mainly Rods/Tubes
Country
Germany
Germany
Dates
circa 1970 (some significant doubt)
circa 1970 (some significant doubt)
Material
Aluminium (Alloy) / Plastic
Aluminium (Alloy) / Plastic
Thread
----
----
Boss Type
not tapped
not tapped
Boss Thread
----
----
Diametrical Pitch of Gears
--
--
No. of Parts in System
16
16
Hole Pitch (Spacing) (mm)
---
---
Diameter of holes in Strips(mm)
---
---
Diameter of the Bore in Bosses(mm)
Diameter of Axle Rods(mm)
5.0 (see comment *1)
5.0 (see comment *1)
Types of Nuts and Bolts
Nuts: --
Bolts: --Bolts: --
Nuts: --
Bolts: --Bolts: --
Material/Finish of Nuts and Bolts
-- -- --
-- -- --
Size of the Nuts across Flats (mm)
---
---
Bolt diameter (mm)
---
---
Comments
5mm Tubes push into plastic Connectors, some with flexible necked sockets to allow Tubes to be angled..2 plastic Pulleys, with rubber Tyre for one..
Below there are manuals/leafets and photos which can be downloaded by clicking on the appropriate image.